My EDC is a Buck Vantage 345. Also have a 340 if I'm going somewhere blade length could be a problem.My "dress" EDC is a Kershaw Leek.Slimmer and...
Thinking seriously of ordering a stove top fan.No electricity should the power go out.We don't use the inside stove a lot just in this" in...
Have you tried an MS 250 ? Mine has an 18" bar and,while it's not an 026,does a great job.When I was looking at saws in that category,the dealer's...
Only complaint I really have with the new caps is on my 250s bar oil.It sometimes won't engage correctly but I found a cure.The inner ring must be...
For those who use Fiskars or Husqvarna axes or mauls,do you find any difference in the vibration transferred to your arms or joints? I've always...
I'd have to have some "expert" help for that. It's basically a box-like wood stove with a finished sheet metal cabinet surrounding it.Holes in the...
Thank you. Makes sense. I'll try to adjust mine for better burning.Always can learn something. I think what was meant by the suggestion about...
I did a search and didn't quite find what I needed.Don't want to start and wars between ideas but just asking for advice. I know it's been talked...
For those who use the old type stove,do you use a pipe damper ? I was told to always install one for use as a way to starve a chimney fire. I...
I use a Warm Morning cabinet stove to heat part of our home in the fall when we are cooler but don't need to fire up the OWB. I've been wondering...
I am kind of wanting a small saw for fence work, too. But then I also have considered a bigger saw for bigger firewood work. Obviously, the saw I...
I noticed these after reading about files and was wondering if anyone had experience with them. There's something great about using a handfiled...
They put them on sale this time of year.I bought mine two years ago.I hope it's just a promotional thing.
Mid Atlantic Stihl Dealers who participate have the MS 250 down to 299,99 through most of November. I bought one in 2019 to back up my MS 362 for...
That was my first thought,too. I just wanted to see if I could fix it myself and learn something.I have a local guy who will fix it on his grinder...
I have a .325 pitch Oregon chain which has some nicked teeth from brush cutting.:emb: When I use my usual 3/16" file,I am getting deeper into the...
Here's my .02. First,it largely depends on the size and amount of wood you actually will use it on,as others have already pointed out.Don't get...
Thanks. That's what I thought but I wanted to be sure.I'd run a 20" if I could get one.Oregon only goes to 18" for my model. .325 pitch and.063...
I should know this ,but. Will going from an 18" ar to a 16" bar make any difference when you are only cutting 12"-14" diameter or less? Seems like...
Don't know much about the physics involved but one thing jumps out. Safety. Whatever you decide,please take time and think it through from a...
