You now should be set for a good while in the small saw department, kinda funny shop my wife works at has a 194 rear handle now they normally...
Well your same PIN number on sprockets. A 7 pin .404 will have a faster chain speed than a 7 pin 3/8 will because of the larger distance between...
Cheaper more common, yes it does take less power to turn and cuts a narrower kerf. The old saws used .404 pretty often even on small saws like the...
Largest one man saw by Stihl and yes .404 takes more but I stand by my thoughts of the 066 being as fast or faster. I had .404 on my 066 with a...
No I don’t work in the woods personally but cut wood for the house and shack during the winter. Have friend at work that logs on side and half my...
Never had an issue using winter weight bar oil
The 194’s are nipping at the heals of a stock 201 after mods, this is why I recommend the local guys that were starting their tree services up...
About 20 thousandths off the built in key. Works well I’ve done at least 25 193’s and 194’s including my own and they’ve been running for years.
I’m not 100% with you on that one I have a 56” on my 066 round top that’s slightly warmed over and had up till recently an 090 that was low hours...
I can look but I might have a pre done used muffler and flywheel for the 194 I’ve gotten a few that lost crank bearings as parts saw but overall...
[ATTACH] The 019t got a bump in size to become the 191 but the 020t and ms200t handled better and had more power so the 191 just died off. Small...
Super long restrictive air intake made of plastic that preheated the air coming into the carb. Drew air in from back of handle and the air was...
Yep 08, 08s and the s-10 top handle version that my cousin who logged called them tea kettles.
[ATTACH] or this part number, not sure if your saw has 3mm or 3.5 mm rope.
If they have it, some of the smaller saws had slightly different set up than others but this one for the 201/251 would definitely work it’s more...
[ATTACH] Yes, the shock absorber is molded into thr handle and comes as one assembly
Some do now I carry them for the tree service saws but they carry them at the local shop. First rope i changed on one 500i had 7,000 pulls on it...
Yes but in my experience so far the actual Stihl branded ropes last longer. It’s actually German made starter rope, I know the 241 is small but...
If you get to them we may be able to avoid you having to buy a very large limited use mill and bar since I have a 72” grandberg and you live in mn...
This is the 72” this log was only about 42” in the center but at the time I didn’t have the 56” bar for my 066 and there was a fork on another...
