No it's .050". I don't care for 404 much except in dirty nasty stuff.
It's for racing and big sprockets. The belly keeps the chain from riding out of the groove.
Yep
Its a cannon race bar. 76dl to fit with a 9 pin. I haven't filed that chain yet. I could t find any Oregon to shorten so I used a stihl chain. I...
Doing good. Finally made a chain to fit that bar. Down to 4 running saws now. Saws have gone to 3rd or 4th down the list
.[IMG]
Red97 is the only one stamping. I cut and weld mine and it's low volume since it's so time consuming.
I think those oils are better for storage. It was only couple spots on the throws of the crank. It wiped right off.
Not with klotz. One sit for 8 months or so with K2 or Motul. It did have a few spots. R50 is probably the best for protection but it has a little...
Klotz original techniplate. I can mix it with any gas and not worry about separating or the fuel having too much alcohol in it even if it's...
Top 5 out of 15 or more oils I tried.
I concur. Both looked ok but nothing spectacular.
All of my equipment get the same
Shiny This is the coolest saw I've worked on.[IMG][IMG]
It's hard to copy anything from a picture. The old racesaw guys showed all kinds of stuff. You go win any races anywhere?
Saber looked great. Smaller carbon layer on crown with transfer wash showing. Plwnty of oil on the underside of the piston. Ultra made a lot more...
I use saber at 32:1
I'll show any of the ones I did but one. Someone else welded the reed cage on. Nothing these jugs is that special.
I meant of the one you ported. I know Jack won't show anything.
Yes the modified chamber and flow enhancements is what he says. Any pictures of the port work in them? I have a 261 here. It's husky like enough I...
