[img] [img] [img] They get the job done but my 660 will cut faster just because the rpm's are higher. The 090 might overtake on something 5 ft...
It's not a Stihl bar but what was on it when I bought it. Guy told me they had one saw with 3 ft and one with a 4ft so they wouldn't have to...
This was one of the last ones made. Township in New York bought 2 of them and barely used them. I got it from them about 15 years ago.
[img] When Stihl made the 090 into an AV, it looked kind of wonky too. This is an all factory original besides the bar.
Back when Ebay first started I saw a listing for 3 jugs and 2 NOS Stihl pistons listed for a 009. I bought it as mine had the rubber plug come out...
I do know an 011 top end won't work on a 009. Don't ask me how I know. LOL
I've had no issues with my 192. Had to replace the isolator spring once in 10 years and that because I was pulling hard when I got it stuck. The...
It's a Modified Dodge WC40 1/2 ton Military truck There is a couple video links to it below(first 2). Have over 3000 hrs in my build time. Have...
Furnace house got stacked in first and burning that this year. About 10 cord in there as it's over 8ft high. [img] [img] [img] Last year...
If I don't dig them out I use Tordon RTU(Ready To Use). I dribble it on a paint brush and hit the whole surface on little ones. Bigger stuff, just...
It gets the job done and most of what it would do on a clearing job is soft wood anyway. I use mine for everything. If I was a climber and wanted...
I would suggest looking into the Stihl 194 CE. The price is a lot less than the 201. I bought a 192C new when they came out and have used it a...
Right after finishing my splitter on maybe the 3rd use, I was splitting up some 3 ft rounds for my Dad at a rental. In the middle of the tree was...
Kind of what I figured. Sad part is I will not risk buying another Oregon part from a "bad batch". Pretty sure they knew there was an issue and I...
Without it being hardened! LOL doesn't work well as it smokes up in a hurry.
You can move the sprocket in and out almost 3/16 of an inch. Notice in the one pic you can't even see the sprocket trrth much at all? In the last...
I'm on the last one and it's starting to sink in as well. I'm not buying any more from Oregon.
They might have gotten bought out, subbed out some stuff to make more and let quality suffer. I've used their bars in the past and not had an...
I adjust them like I always do. Snug till I can pull the chain and just see the bottom of it over the bar. I've cut for abour 50 years and never...
I bought my Stihl 192C new. First bar lasted about 4 years of pretty heavy use. Second Stihl replacement was the same. Both were non greasable....
