Here is some of the wood I used to leave behind before I got the 461...that’s a 25” bar when saw was brand new....Red oak.. [ATTACH] Once my...
You may not think about it now, but if you run into wood that’s in the 24” plus range, or are passing up a lot of the bigger stuff you may want to...
Aftermarket.....I buy on eBay... I am no professional chainsaw repair guy...I don’t really mess with carb rebuilds though....after a saw gets...
You can buy a new AM carb....I use them in clamshell saws a lot and can’t recall any problems...
I hear ya on the endless task!!! Also I had a very nice new 211 easy start that I got in a group of non-runners...nothing was wrong with it, and...
What is the biggest size wood you will cut, that’s the important question.... By the sounds of it, this won’t be your “last” purchase...
I have done many chains that had 1-really bad cutter and the rest of the chain was ok....I always fix the 1-bad cutter, then do the rest of the...
Mag Craft i know what you are saying....both methods are great, it depends on the operator.... I like both methods...a lot of the times when a...
94BULLITT i run into that a lot too....if I know there is possibly dirt in the wood, I use RM....
I agree with you 94BULLITT well put.... When I first got a grinder i planned on only using it for just rocked out Chains and to get all the...
bocefus78 while I am thinking about it and before I forget, lol.....I wanted to make sure you know the 60-degree head tilt on the Oregon grinder...
The tilt is supposed to make the chain self feed/cut better.....it makes the cutting point “sharper”....experiment with it see what ya...
dall yes sir I can!!!! bocefus78 let me start out by saying I am no expert and I am always learning, I am always Leary of the guy whom seems to...
Thank ya sir!!! My wheels are the excact same brand as yours.....mine worked great out of the box....I still use both stone and CBN wheels, just...
What is the dunmore???
Nice I know what you mean about small burr... Is your solid wheel from Diamond wheel co.???
Here is a picture of a cutter after I ground it....it shows that you can get the same profile of a file, if you get all your settings just...
To the OP, have you cut with any 3/8 chain you have ground with your 520.....I know that I hate grinding lo-pro/picco chain, just a pain........
Does your vented wheel do a better job than the solid CBN wheel???
We’re did you get your diamond dresser I would like to get one myself.... I use both stone and CBN wheels, both have pros and cons....I have...
