Toyo open country m/t. Not the greatest on ice but pretty much unstoppable every where else
You can't make more time but you can do it faster. I can cut and load a truck load in about 1.5 hrs if I can park close to the wood. If I had 3...
You really need to measure it before you cut it up. If the load is not consistent lengths and some is on a trailer and some is on a truck, getting...
Nice axe haul. I go to a fair amount of yard sales and finding anything with a maker's Mark is getting rare around here. Those should clean up nice.
Id consider pounding wedges cruel and unusual, but it looks like the edge isn't particularly sharp? Maybe grind an edge on it so it starts...
Crazy. You can buy a spruce 2x4 for like 4 bucks, and it's dry!
Vinegar will remove the rust if you can rig up a way to soak them. Navel jelly works good too. A small wire brush or scotch brute will make it go...
Wow theres a big one there in the middle. I start on the ends and cut any thing exposed and work my way in.
If your foundation isn't done and is going to be sticking out of the ground like that, building a door like that shouldn't be a problem. Have the...
So it leaks when it's running? Some how the tank must be getting pressurized
I use single wooded stakes for larger tomatoes. Tie with cotton rags or twine. Plum tomatoes I gave up on tying up an let them go. They seem to do...
Being a wood man, all I use is wood. For cooking in a metal grill split the wood a little smaller and burn it down to coals then get to grillin....
Looks like you have removed a bit of tooth but zero raker. It's not going to cut good.
Well done
Id say drive link thickness and overall kerf width are related. But with a difference of .013, in you application the difference won't matter. Id...
Sounds like the classic 2 stroke blow up. It was always "running good" then poof, she gone.
Looking good. Anything is paw-sible with the right crew.
Inventory costs a lot. Modern manufacturing is based of minimizing it. From a business stand point it doesn't make sense to increase capacity if...
All about chisel angle. He never mentioned what the chisel angle is supposed to be. Only real number was 1/5 of the file diameter above the top plate.
Measure your gage. What do you get?