That's quite the comprehensive website. Stihl must be taking this as a new low not even making this list.
What part of maine? Plenty of saw shops around should be able to get what you need. Or buy one online and have it shipped directly to the boss in...
Logs to lumber is roughly 2 cord per thousand feet.
Amazing the lengths taken to measure firewood on this thread.
Hopefully the police still pressed charges on that old scumbag.
I would not bother with a lubricator. Especially if you ever want to paint anything. I had one and took it out. I have a IR 60 gal T30 compressor...
Before Otter and Jet sleds were readily available, a car hoods pulled behind behind snowmobiles were popular for hauling wood around here. I...
Each situation is different, in in general you have the right idea. I always cut up a tree from the top down to minimize pinching and you can...
Essentially you're paying stumpage rate for firewood. 10 a tree is kinda high. A lot of states have a summary type report on what price wood...
Timberwolf, Wolf ridge, supersplit, Ram, Built rite are all US companies. Eastonmade and powersplit are nice too but from Canada.
That wood has a closed grain so not oak. I'd say it's an old stump sprout cherry. Probably been dead 20 years.
What about the gasket hanging down?
I use pallets. After a few years and the stack is empty, if the pallet is rotten/ sunk into the ground I put the next new pallet right on top and...
Any running issue with a husky I would start with the fuel line and filter.
Council tool is made in USA. I'd get the 6 pound with the axe eye handle.
You can get a stainless loop to install in the fire box of the stove. Then plumb it in. Mostly wood cook stoves use them. I've though about...
Score the bearing with a cutoff wheel then tap with a chisel. That should crack it and then pull off easy. Be careful not to cut too deep.
I'd have them fill the garage with any thing good. Then have a yard sale. Or If you don't need the little bit of money you might get just donate...
I had a pair of aftermarket 18v Makita NiMh batteries. Worked and lasted about the same as original. I was going to get more but the charger died...
I bet you would like running that hoooskvarna 90 on the table. No primer to mess around with.
