[ATTACH] I don’t normally get involved with prices on classified adds but I just couldn’t keep quiet about this one seller is asking 185.00 for...
After running my new F-400 for a couple of months I can say that I am having the same results as you are. One thing I noticed that if I use larger...
I have a Dolmar 5105 and no trouble with the on off switch but it has a bad ignition module that I am still waiting for so it can be repaired. It...
My chimneys are not the same because they are in different locations. The Fire view is through the roof near the peak and The basement stove is...
I also run 2 stoves. My house is a ranch style on a walk out basement.My upstairs is heated by the fire view and it does a great job up but I am...
The fireview is an amazing stove. It is so amazing that I wish I would have bought another one instead of the Jotul for the basement
A better picture of the secondaries[ATTACH]
[ATTACH] Yes
Pipe temperatures didn’t really change with addition of the damper either. Before the damper pipe temps were around 230 and they only increased by...
I am updating this post with the results of adding a damper to the stove pipe for the Jotul F400. I must say it was very successful. Stove top...
Yes I should
Poops I forgot the picture[ATTACH]
Already had the first frost a little while ago snow is in the extended forecast for next Sunday into Monday
[ATTACH] Here is what I am working with
One last question, what is the best location for the damper?
Thanks for all the suggestions I will be installing a damper tomorrow and giving the stove a real good look over to see if anything is out of...
No there is no damper in the pipe. I guess my biggest concern is that I don’t want to over fire the stove.
It is a brand new stove I would hope it doesn't have any seams leaking. Is there a way to check this?
No back puffing when I open the door
I am guessing it is instal instructions say a minimum of 14 feet for chimney height my set up is about 20 feet the outside air temp is 30 degrees...