That old one is a great restoration project waiting to happen, too. Those units are fantastic splitters capable of real work. I own an old Iron...
Elastostart if it doesn’t have one (it probably does) helps with these 1122s. Very good saw.
I’m sure you would have seen similar stumps in the Hilton, NY area circa 1990. I am still amazed that we lucked out on direction a few times. I...
Have a trusted saw nut go through the fuel system. The intake boot issue and a finicky idle can usually be identified and fixed.
It does sound like it’s loading up a bit. Start with a good air filter clean and the make slight adjustments to the L (in, clockwise) and see if...
Yes to the above responses with an emphasis on cleaning the air filter, filling with fresh fuel, warming up before adjustments, and keeping these...
Ya know what… it really was.
Correct. Not a deal breaker, though.
Scenario 1- You have a 5mm recoil and a 4mm case half (unlikely for your situation). Options are- drill and tap the case to 5mm OR drill and...
I mean the recoil (starter) screws that hold the recoil to the case half. Some are 4mm for this series (older 034s). There are workarounds for...
Recoil bolt size?
Good choice getting the full case, btw.
If you’d like to get some of your money back and have an extra crankshaft around to sell, I’d be interested.
Yes, the spacer is needed depending on cylinder-muffler-case pairings. Not a deal breaker as those spacers are around and are easy enough to deal...
lol, I have some knowledge and am happy to help out. There were crankcase variations but nothing that affects the case mating surface. That’s the...
He has done several jobs for me and is excellent. I would personally scrounge for a local 1125 matching crankcase set if that pin area is really...
034, 036, 360= 1125 series. One of Stihl’s best for sure.
I’ve tried dozens. Most of them have been for saws. 90% have had issues. 60% haven’t been fixable.
Don’t replace the engine unless the engine is shot. Aftermarket carbs are rarely “good.”
Numbers seem good. Replace the fuel filter and clean the air filter… then check again after it’s been hot like said above.
