Sure.. Those cages are called Cattle panels @ Tractor Supply 50” x 16’, bend em around, overlap by 1 square, fasten together with 3-4 wire ties, string, ect. That makes a 5’ circle that’ll sit overtop of a skid (wire to the ground).. The wood comes off the splitter into cage, slightly mounded each one holds 1/2 cord. If ya wrap em like I/we did, you can solar kiln the wood for the customer that needs truly DRY WOOD. Or just top cover.. To unload, simply pick it up, get it into/over dump trailer/truck, cut the wire ties, shake a bit, done !! It takes alot of handling time outa the process,, and you know time is money. In my case, I move em with a John Deere 410 backhoe w/forks, once the wood comes off the splitter I never have to touch it again till it’s time to go into the stove.. Hope that helps a little ?? Chuck Edit, btw, those panels are about 32 bucks currently..
How are you getting a 5' circle on a pallet? Are these oversized? I typically get/see 40"x48" or something close to it.
Nooooo, the pallet sets inside the 5’ circle, so when ya pick it up you gotta hold of both.. make sence ? It’s easier to cut out a few verticle pieces of wire with bolt cutters then to be so precise with fork locations when moving them..
