In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

So begins the bathroom so I can finish the attic!

Discussion in 'The DIY Room' started by Pallet Pete, Jul 30, 2018.

Page 10 of 17
  1. papadave

    papadave

    Joined:
    Oct 3, 2013
    Messages:
    18,181
    Likes Received:
    82,470
    Location:
    Right where I want to be.
    Holy moly. Lots of extra work. Should come out much gooder then.
     
    papadave, Oct 28, 2018
    #181 Top
    wildwest, mat60, brenndatomu and 3 others like this.
  2. billb3

    billb3

    Joined:
    Oct 7, 2013
    Messages:
    10,318
    Likes Received:
    53,269
    Location:
    SE Mass
    I had a TV on a dishwasher in the living room for a while.
    Sometimes ya just gotta be a bit unconventional
     
    billb3, Oct 28, 2018
    #182 Top
    savemoney, wildwest, mat60 and 4 others like this.
  3. Pallet Pete

    Pallet Pete Moderator

    Joined:
    Oct 2, 2013
    Messages:
    13,474
    Likes Received:
    54,059
    Location:
    Ovid
    The way I see it is either I lay them and fight the cement or I cut them and spend a little longer on it. I’d rather it be right and ready when it’s time to set the tiles.

    So far so good it’s looking pretty nice! :D
     
    Pallet Pete, Oct 28, 2018
    #183 Top
    savemoney, wildwest, Canadian border VT and 4 others like this.
  4. Pallet Pete

    Pallet Pete Moderator

    Joined:
    Oct 2, 2013
    Messages:
    13,474
    Likes Received:
    54,059
    Location:
    Ovid
    Well I’m done for the day.

    Had to switch the trowels for the cheapo it works way better than the fancy one I bought of the same depth.

    I have a lot of mortar through the grout lines more than I want but it’s cleanable so o well. More work but worth it in the end.

    6317651F-204E-4FB3-81DF-EDE7BF861D8B.jpeg B9F0B3B5-20B5-4207-9745-95DA2BD284E7.jpeg
     
    Pallet Pete, Oct 28, 2018
    #184 Top
    savemoney, wildwest, milleo and 6 others like this.
  5. papadave

    papadave

    Joined:
    Oct 3, 2013
    Messages:
    18,181
    Likes Received:
    82,470
    Location:
    Right where I want to be.
    We keep a carpenter pencil handy to get excess mortar from between the tiles as we go.
     
    papadave, Oct 28, 2018
    #185 Top
    mat60, savemoney, wildwest and 5 others like this.
  6. Pallet Pete

    Pallet Pete Moderator

    Joined:
    Oct 2, 2013
    Messages:
    13,474
    Likes Received:
    54,059
    Location:
    Ovid
    Thats a gooder Idear!:thumbs::thumbs:
     
    Pallet Pete, Oct 28, 2018
    #186 Top
    savemoney, wildwest, Chaz and 5 others like this.
  7. Pallet Pete

    Pallet Pete Moderator

    Joined:
    Oct 2, 2013
    Messages:
    13,474
    Likes Received:
    54,059
    Location:
    Ovid
    Well I got the first row set and drying for the tile. Twas a pain in the Bleep.... BUT it’s gonna look gooder!

    There was a rather annoying bend in the lip of the tub so ya :startled: :headbang: $112 for a steel tub is still worth it though.:thumbs:

    The first row is going to get left to dry so I can tile the rest easier. I have some floor work left to do as well so hopefully in a few weeks all the tile will be done especially the shower........

    012D5DE6-D519-42D4-A79E-C0DDAC409A30.jpeg
     
    Pallet Pete, Nov 4, 2018
    #187 Top
    Midwinter, Woodwidow, mat60 and 6 others like this.
  8. papadave

    papadave

    Joined:
    Oct 3, 2013
    Messages:
    18,181
    Likes Received:
    82,470
    Location:
    Right where I want to be.
    In a few months, this will all be just a painful memory............Oh wait.........
    No, this will all have been worth it. Yep, that's gooder.:dex:
     
    papadave, Nov 4, 2018
    #188 Top
    mat60, bogieb, savemoney and 4 others like this.
  9. billb3

    billb3

    Joined:
    Oct 7, 2013
    Messages:
    10,318
    Likes Received:
    53,269
    Location:
    SE Mass
    props on tile work
    our current bathtub is all 4 inch tile, even the ceiling
    and needs redoing
    I'm considering a plastic shower.
    Except for an outdoor plastic shower I've never owned one. Always been tile.
     
    billb3, Nov 4, 2018
    #189 Top
    Midwinter, mat60, bogieb and 6 others like this.
  10. Pallet Pete

    Pallet Pete Moderator

    Joined:
    Oct 2, 2013
    Messages:
    13,474
    Likes Received:
    54,059
    Location:
    Ovid
    Not painful at all! Admittedly a little annoying though. :whistle:

    No more mold issues.... It’s amazing when I turn the furnace on there’s no smell anymore it’s totally gone now! Smells so much better in the house without that stupid cold air return in the bathroom!

    I’m debating a home estimate for insurance afterwords I bet our home value goes up a little..
     
    Pallet Pete, Nov 4, 2018
    #190 Top
    Midwinter, mat60, bogieb and 5 others like this.
  11. Pallet Pete

    Pallet Pete Moderator

    Joined:
    Oct 2, 2013
    Messages:
    13,474
    Likes Received:
    54,059
    Location:
    Ovid
    My experience with plastic showers has NOT been a good one. They all break in the same spot... Right where you stand. I think the difference would be if you put mortar under the pan you’d be good to go. They are not very strong.

    My wife’s uncle has a beautiful bathroom in his cabin and they used a plastic / fiberglass shower which I believe was mortared in and it’s held up well.

    The reason I didn’t do it here was I can replace a bad or broken tile easily but a plastic liner is a total tear out if it breaks.

    Our old apartment had a crack in the shower and they had 4 guys come in and cut the bathroom to replace the tub / shower it was one heck of a job. I ended up helping too.
     
    Pallet Pete, Nov 4, 2018
    #191 Top
    mat60, bogieb, savemoney and 3 others like this.
  12. papadave

    papadave

    Joined:
    Oct 3, 2013
    Messages:
    18,181
    Likes Received:
    82,470
    Location:
    Right where I want to be.
    Beautiful!
     
    papadave, Nov 4, 2018
    #192 Top
    mat60, bogieb, savemoney and 2 others like this.
  13. brenndatomu

    brenndatomu

    Joined:
    May 29, 2015
    Messages:
    23,419
    Likes Received:
    150,383
    Location:
    NE Ohio
    SOP is no return air from the bathroom or the kitchen...bathroom for sure! That's a big :doh:
     
    brenndatomu, Nov 4, 2018
    #193 Top
    mat60, bogieb, savemoney and 3 others like this.
  14. Pallet Pete

    Pallet Pete Moderator

    Joined:
    Oct 2, 2013
    Messages:
    13,474
    Likes Received:
    54,059
    Location:
    Ovid
    Ill admit I have known for years now about the cold air return but I have never had the time or moneys to do anything about it till now....:hair: I wish that I had gotten into this years ago but that would have led to this project sooner and probably on a much tighter budget than what we have right now...:whistle:

    That stupid 20/20 hindsight thing. I never new we had so much mold though if I did I would have started budget or not...:hair:
     
    Last edited: Nov 4, 2018
    Pallet Pete, Nov 4, 2018
    #194 Top
    papadave, Midwinter, mat60 and 5 others like this.
  15. wildwest

    wildwest Moderator

    Joined:
    Jul 21, 2014
    Messages:
    30,137
    Likes Received:
    141,306
    Location:
    Wyoming high plains
    This house is the first time I've had plastic surround, all others were tile. I appreciate not having to clean grout lines.
     
    wildwest, Nov 4, 2018
    #195 Top
    LongShot, Chaz, mat60 and 4 others like this.
  16. Pallet Pete

    Pallet Pete Moderator

    Joined:
    Oct 2, 2013
    Messages:
    13,474
    Likes Received:
    54,059
    Location:
    Ovid
    If you still have tile anywhere I got a trick for you!!! :D

    Growing up we would wax the tile with plain Jane car wax once a year or so and the tile stayed nice and clean. It looked awesome and pretty much everything would slide off and there wasn’t any soap scum or residue after showers.

    It’s prbably a bad idea for floors :rofl: :lol::whistle:but walls is awesome!
     
    Pallet Pete, Nov 4, 2018
    #196 Top
    papadave, Midwinter, Chaz and 6 others like this.
  17. Canadian border VT

    Canadian border VT

    Joined:
    Feb 18, 2015
    Messages:
    18,247
    Likes Received:
    119,487
    Location:
    Vermont
    Pallet Pete .. Good hint I've always used rain-ex for car windshield..
     
    Canadian border VT, Nov 4, 2018
    #197 Top
    brenndatomu, Chaz, mat60 and 4 others like this.
  18. Pallet Pete

    Pallet Pete Moderator

    Joined:
    Oct 2, 2013
    Messages:
    13,474
    Likes Received:
    54,059
    Location:
    Ovid
    I use a hard shell turtle wax in my work van windows it really keeps them clean in the winter... It works good with rainx washer fluid too.
     
    Pallet Pete, Nov 4, 2018
    #198 Top
    brenndatomu, Chaz, mat60 and 2 others like this.
  19. savemoney

    savemoney

    Joined:
    Oct 3, 2013
    Messages:
    13,470
    Likes Received:
    69,188
    Location:
    Chelsea Maine
    Nice to see you have it all coming together. I congratulate your wife for tolerating the huge inconvenience of going outside to use the facilities. Pete, my entire living area floors are tiled with the tile. Very neutral and easy to care for. Lowes had it on sale so I bought over 1200 sq ft.
     
    savemoney, Nov 4, 2018
    #199 Top
    Midwinter, brenndatomu, Chaz and 4 others like this.
  20. bogieb

    bogieb

    Joined:
    Mar 30, 2015
    Messages:
    12,238
    Likes Received:
    74,226
    Location:
    New Hampshire
    What brand tub did you get? I had to look a bit to find a steel tub when I re-did my bathroom a couple of years ago. I think there were two options that I found but I didn't want a plastic tub. I had to special order mine as slightly shorter than normal. I went with the plastic surround as that is my only bathroom, so didn't have time to mess with tile and the final set time.
     
    bogieb, Nov 4, 2018
    #200 Top
    brenndatomu, Chaz, wildwest and 2 others like this.
Page 10 of 17