In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

What's up today (bullchiting) thread.

Discussion in 'Everything Else (off topic)' started by Gasifier, Oct 6, 2013.

Page 965 of 5296
  1. Horkn

    Horkn

    Joined:
    Dec 17, 2014
    Messages:
    28,549
    Likes Received:
    161,534
    Location:
    SE Wisconsin

    I don't know if a harder steel pin will fix that.

    Harder = more brittle. Usually...

    You might want to try a stainless pin, and if those don't hold up, maybe some more exotic metal, like titanium?

    What size pins are they?
     
    Last edited: Dec 4, 2015
    Horkn, Dec 4, 2015
    #19281 Top
    Eric VW, Chvymn99, basod and 1 other person like this.
  2. Gasifier

    Gasifier

    Joined:
    Oct 3, 2013
    Messages:
    20,433
    Likes Received:
    103,366
    Location:
    St. Lawrence River Valley, NY
    I would have to ask my neighbor what the exact diameter is. He turned them for it. We still have the originals, which he put back in for me for now so I could use the bucket and forks while he turns some new pins and straightens a couple braces I bent. :emb:
     
    Gasifier, Dec 4, 2015
    #19282 Top
    Chvymn99, wildwest and Horkn like this.
  3. basod

    basod

    Joined:
    Nov 4, 2013
    Messages:
    5,048
    Likes Received:
    20,841
    Location:
    Mount Cheaha AL
    Sounds like you need to adjust the auxiliary hydraulic relief valve:D
     
    basod, Dec 4, 2015
    #19283 Top
    Chvymn99, wildwest, Horkn and 2 others like this.
  4. Horkn

    Horkn

    Joined:
    Dec 17, 2014
    Messages:
    28,549
    Likes Received:
    161,534
    Location:
    SE Wisconsin

    Is that the one that comes in 12 ounce containers, is kept cold, and had some carbonation?
     
    Horkn, Dec 4, 2015
    #19284 Top
    basod, Chvymn99, wildwest and 1 other person like this.
  5. lukem

    lukem

    Joined:
    Oct 4, 2013
    Messages:
    11,837
    Likes Received:
    63,303
    Location:
    IN
    If he turned them them very well may be too soft. You could always harden them yourself.
     
    lukem, Dec 4, 2015
    #19285 Top
    Chvymn99, wildwest, MasterMech and 1 other person like this.
  6. Gasifier

    Gasifier

    Joined:
    Oct 3, 2013
    Messages:
    20,433
    Likes Received:
    103,366
    Location:
    St. Lawrence River Valley, NY
    Then it is done.:thumbs:
     
    Gasifier, Dec 4, 2015
    #19286 Top
    basod, Chvymn99, wildwest and 1 other person like this.
  7. Gasifier

    Gasifier

    Joined:
    Oct 3, 2013
    Messages:
    20,433
    Likes Received:
    103,366
    Location:
    St. Lawrence River Valley, NY
    Caffeine time. Slept in until 6 this morning. I hope to do some more prep work on barn area today.

    While thinning less desirable trees for horse pasture area and barn area I have been piling some firewood logs for next year's supply. Sometime I need to start processing them as well. I think I probably have 3-3.5 full cord in logs. I have another .5 cord that is already split for next year.
     
    Gasifier, Dec 5, 2015
    #19287 Top
    wildwest, Chvymn99, thewoodlands and 1 other person like this.
  8. Jack Straw

    Jack Straw

    Joined:
    Oct 3, 2013
    Messages:
    8,396
    Likes Received:
    52,391
    Location:
    30 miles west of Albany Ny
    Headed out to work. It's gonna be some great weather for the next several days, hoping to get a lot of wood cut! :thumbs:
    I hope everyone has a great day!:rootintootin:
     
    Jack Straw, Dec 5, 2015
    #19288 Top
    Gasifier, wildwest, Chvymn99 and 2 others like this.
  9. yooperdave

    yooperdave

    Joined:
    Jun 16, 2014
    Messages:
    34,309
    Likes Received:
    212,625
    Location:
    Michigan's U.P.
    Grabbed a box of sawdust from a jobsite yesterday. This coupled with some old candles should give me something to do next weekend.

    Gonna try the fire starter thing. Maybe some shredded paper would be nice too? Yeah...

    Plan on using egg cardboard egg cartons for the molds.
     
    yooperdave, Dec 5, 2015
    #19289 Top
    cnice_37, Gasifier, wildwest and 2 others like this.
  10. Homelite410

    Homelite410

    Joined:
    May 12, 2014
    Messages:
    78
    Likes Received:
    292
    Location:
    Iowa
    Hi fellas! This looks like a fun place to camp out! Coffee is on and breakfast is cooking!
     
    Homelite410, Dec 5, 2015
    #19290 Top
    Gasifier, schlot, wildwest and 1 other person like this.
  11. schlot

    schlot

    Joined:
    Oct 8, 2013
    Messages:
    5,244
    Likes Received:
    30,394
    Location:
    NW Iowa
    Only if you like good friendly conversation intertwined with some silliness....otherwise it's not so good here. :)

    Welcome!
     
    schlot, Dec 5, 2015
    #19291 Top
    Horkn, Chvymn99, Gasifier and 1 other person like this.
  12. lukem

    lukem

    Joined:
    Oct 4, 2013
    Messages:
    11,837
    Likes Received:
    63,303
    Location:
    IN
    Just threw some groceries down my neck...time to get back to work.
     
    lukem, Dec 5, 2015
    #19292 Top
    Horkn, Chvymn99, Gasifier and 1 other person like this.
  13. schlot

    schlot

    Joined:
    Oct 8, 2013
    Messages:
    5,244
    Likes Received:
    30,394
    Location:
    NW Iowa
    Hopefully out of there packaging at very least? :)
     
    schlot, Dec 5, 2015
    #19293 Top
    Horkn, cnice_37, Chvymn99 and 1 other person like this.
  14. Homelite410

    Homelite410

    Joined:
    May 12, 2014
    Messages:
    78
    Likes Received:
    292
    Location:
    Iowa
    Oh, passing wrappers don't sound too fun!
     
    Homelite410, Dec 5, 2015
    #19294 Top
    Horkn, Chvymn99, schlot and 1 other person like this.
  15. Homelite410

    Homelite410

    Joined:
    May 12, 2014
    Messages:
    78
    Likes Received:
    292
    Location:
    Iowa
    Here is my family for those of you I've never met. [​IMG]
     
    Homelite410, Dec 5, 2015
    #19295 Top
    Horkn, basod, unclefess and 8 others like this.
  16. Jack Straw

    Jack Straw

    Joined:
    Oct 3, 2013
    Messages:
    8,396
    Likes Received:
    52,391
    Location:
    30 miles west of Albany Ny
    Great pic! :thumbs:
     
    Jack Straw, Dec 5, 2015
    #19296 Top
    Horkn, unclefess, Canadian border VT and 2 others like this.
  17. wildwest

    wildwest Moderator

    Joined:
    Jul 21, 2014
    Messages:
    30,152
    Likes Received:
    141,434
    Location:
    Wyoming high plains
    What a great pic!!

    BTW, cnice_37 is looking for fleeced lined flannel for his wife, where does your wife buy hers?
     
    wildwest, Dec 5, 2015
    #19297 Top
    Horkn, unclefess, cnice_37 and 1 other person like this.
  18. schlot

    schlot

    Joined:
    Oct 8, 2013
    Messages:
    5,244
    Likes Received:
    30,394
    Location:
    NW Iowa
    Great family! I take it you guys are expecting another Homelite operator?
     
    Last edited: Dec 5, 2015
    schlot, Dec 5, 2015
    #19298 Top
    Horkn, unclefess, Canadian border VT and 2 others like this.
  19. Homelite410

    Homelite410

    Joined:
    May 12, 2014
    Messages:
    78
    Likes Received:
    292
    Location:
    Iowa
    Yes, Victoria arrived June 10th. [​IMG]

    Here is Jana, my 10 yo. Yes, her wild thing is ported. [​IMG]

    Hailey 7 loves her 10-10.[​IMG]

    And Emma 5 did her best to take the old craftsman apart. [​IMG]
     
    Homelite410, Dec 5, 2015
    #19299 Top
    Horkn, basod, Jack Straw and 6 others like this.
  20. Canadian border VT

    Canadian border VT

    Joined:
    Feb 18, 2015
    Messages:
    18,271
    Likes Received:
    119,745
    Location:
    Vermont
    Canadian border VT, Dec 5, 2015
    #19300 Top
    Horkn, unclefess and wildwest like this.
Page 965 of 5296