In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

What's the popular pellet for this year ?

Discussion in 'The Pellet Bag' started by Russell, Sep 14, 2015.

Page 7 of 17
  1. will711

    will711

    Joined:
    Oct 4, 2013
    Messages:
    10,270
    Likes Received:
    50,828
    Location:
    Pocono Mts.
    Not a problem ,I told you I liked your style :yes: The reply button works great ,but it quotes the whole post if you only want to quote a certain section then use the high light method.
     
    Last edited: Oct 9, 2015
    will711, Oct 9, 2015
    #121 Top
    gbreda, CleanFire, IHATEPROPANE and 6 others like this.
  2. IHATEPROPANE

    IHATEPROPANE

    Joined:
    Oct 13, 2013
    Messages:
    4,671
    Likes Received:
    19,075
    It's not really bottom feed versus top feed, but designs of the auger. The Quads with that cork screw type auger are sensitive to them. My West Point can burn a bag full of sawdust without issue.
     
    IHATEPROPANE, Oct 9, 2015
    #122 Top
    imacman, Russell and ttdberg like this.
  3. imacman

    imacman

    Joined:
    Oct 23, 2013
    Messages:
    6,588
    Likes Received:
    27,315
    Location:
    Denver, NC
    Agreed. Both my Astoria & 10-CPM ate the fines no problem.....never had a jam in either stove.
     
    imacman, Oct 9, 2015
    #123 Top
    slvrblkk, IHATEPROPANE, ttdberg and 1 other person like this.
  4. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,629
    Location:
    Northeast Oh
    True. The quad has a spring type auger. A screw and cylinder type auger (even with a flight) will pull fines.

    My endurance has a flight, but pulls them. The Quad needed cleaned every so often because it won't pull fines (not 100%).
     
    DexterDay, Oct 9, 2015
    #124 Top
    imacman, IHATEPROPANE, Russell and 1 other person like this.
  5. Dpopps

    Dpopps

    Joined:
    Jul 14, 2015
    Messages:
    671
    Likes Received:
    3,667
    Location:
    MI
    I have never had a problem with fines, them seem to just drop out with the pellets.
     
    Dpopps, Oct 10, 2015
    #125 Top
    imacman, IHATEPROPANE, Russell and 2 others like this.
  6. Russell

    Russell

    Joined:
    Sep 9, 2015
    Messages:
    1,166
    Likes Received:
    5,631
    Location:
    South Coast , Massachusetts
    Well after cleaning out the hopper and the vacuum hose and now screening my pellets went down stairs to find the call light on but stove not running . I hit the reset button and started right up . It's a new stove totally clean with top of the line pellets .:picard:Also hopper being low made cause this is that a fact jack ? :cool:
     
    Last edited: Oct 10, 2015
    Russell, Oct 10, 2015
    #126 Top
    ttdberg, slvrblkk and IHATEPROPANE like this.
  7. gbreda

    gbreda

    Joined:
    Oct 17, 2013
    Messages:
    7,482
    Likes Received:
    37,068
    Location:
    NH
    X2, I haven't seen Sets up here in 6-8 years :mad:
     
    gbreda, Oct 10, 2015
    #127 Top
    bogieb, ttdberg, IHATEPROPANE and 1 other person like this.
  8. gbreda

    gbreda

    Joined:
    Oct 17, 2013
    Messages:
    7,482
    Likes Received:
    37,068
    Location:
    NH
    Thats what I have been seeing around here.
    259 for FSU at HD, Greene Team at Lowes for 279 or Lacrete for 294 mean Lacrete are in the house :yes:

    Maybe the 239 prices will be around in a month or so when they are getting the summer stuff out again :p
     
    Last edited: Oct 10, 2015
    gbreda, Oct 10, 2015
    #128 Top
    bogieb, ttdberg, slvrblkk and 3 others like this.
  9. gbreda

    gbreda

    Joined:
    Oct 17, 2013
    Messages:
    7,482
    Likes Received:
    37,068
    Location:
    NH
    I never knew that, thanks !! :thumbs:
    Have one on me buddy ! :cheers:
     
    gbreda, Oct 10, 2015
    #129 Top
    ttdberg, slvrblkk, will711 and 3 others like this.
  10. gbreda

    gbreda

    Joined:
    Oct 17, 2013
    Messages:
    7,482
    Likes Received:
    37,068
    Location:
    NH
    Dude, you wont find a friendlier bunch of misfits that know their chit about all things wood and are willing to help any newcomer while having a good time. Dont take offense to the wisecracks that flow freely at times-its all in fun :thumbs:
     
    gbreda, Oct 10, 2015
    #130 Top
    eatonpcat, bogieb, ttdberg and 7 others like this.
  11. will711

    will711

    Joined:
    Oct 4, 2013
    Messages:
    10,270
    Likes Received:
    50,828
    Location:
    Pocono Mts.
    Don't have to ask me twice :cheers:
     
    will711, Oct 10, 2015
    #131 Top
    eatonpcat, IHATEPROPANE, ttdberg and 3 others like this.
  12. slvrblkk

    slvrblkk

    Joined:
    Oct 6, 2013
    Messages:
    6,647
    Likes Received:
    29,535
    Location:
    Northampton, PA
    Did you notice if there were ANY pellets in the burnpot?
     
    slvrblkk, Oct 10, 2015
    #132 Top
    IHATEPROPANE, ttdberg and Russell like this.
  13. Russell

    Russell

    Joined:
    Sep 9, 2015
    Messages:
    1,166
    Likes Received:
    5,631
    Location:
    South Coast , Massachusetts
    Didn't see any but did notice I could see embers through a space in the ash door . Getting ready to tighten up all the latch screws.
     
    Russell, Oct 10, 2015
    #133 Top
    IHATEPROPANE, ttdberg and will711 like this.
  14. slvrblkk

    slvrblkk

    Joined:
    Oct 6, 2013
    Messages:
    6,647
    Likes Received:
    29,535
    Location:
    Northampton, PA
    You might want to start a separate thread about this and get everyone's input....in the meantime (sorry if this was answered by someone already) but is the ceramic thermocouple adjusted correctly and is the thermocouple wire pushed all the way into the ceramic housing?
     
    slvrblkk, Oct 10, 2015
    #134 Top
    IHATEPROPANE, ttdberg, gbreda and 2 others like this.
  15. Russell

    Russell

    Joined:
    Sep 9, 2015
    Messages:
    1,166
    Likes Received:
    5,631
    Location:
    South Coast , Massachusetts
    Checking all that now. A couple of pellets in the burn pot and this is the ash draw.Thermocouple wire was 1/2 inch out of the cover.
     

    Attached Files:

    Last edited: Oct 10, 2015
    Russell, Oct 10, 2015
    #135 Top
    ttdberg and slvrblkk like this.
  16. slvrblkk

    slvrblkk

    Joined:
    Oct 6, 2013
    Messages:
    6,647
    Likes Received:
    29,535
    Location:
    Northampton, PA
    Hmmm....I'm thinking the stove isn't seeing the proof of fire after the initial drop of pellets into the pot.
     
    slvrblkk, Oct 10, 2015
    #136 Top
    ttdberg, Russell and will711 like this.
  17. Russell

    Russell

    Joined:
    Sep 9, 2015
    Messages:
    1,166
    Likes Received:
    5,631
    Location:
    South Coast , Massachusetts
    Ok everything cleaned , tighten and Thermocouple wire pushed back in . I'm pretty confident that should do it . It's Sam Adams time.
     

    Attached Files:

    Last edited: Oct 10, 2015
    Russell, Oct 10, 2015
    #137 Top
    bogieb, will711, ttdberg and 2 others like this.
  18. gbreda

    gbreda

    Joined:
    Oct 17, 2013
    Messages:
    7,482
    Likes Received:
    37,068
    Location:
    NH
    I remember when Sam was the new kid on the block in Boston. Does that make me old, or a wise and informed historian? :)
     
    gbreda, Oct 10, 2015
    #138 Top
    bogieb, will711, ttdberg and 3 others like this.
  19. slvrblkk

    slvrblkk

    Joined:
    Oct 6, 2013
    Messages:
    6,647
    Likes Received:
    29,535
    Location:
    Northampton, PA
    :whistle:
     
    slvrblkk, Oct 10, 2015
    #139 Top
    IHATEPROPANE, ttdberg, Russell and 1 other person like this.
  20. Russell

    Russell

    Joined:
    Sep 9, 2015
    Messages:
    1,166
    Likes Received:
    5,631
    Location:
    South Coast , Massachusetts
    Wise :rofl: :lol:
     
    Russell, Oct 10, 2015
    #140 Top
    IHATEPROPANE, will711, ttdberg and 1 other person like this.
Page 7 of 17