In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Should go 20+

Discussion in 'Modern EPA Stoves and Fireplaces' started by rdust, Dec 4, 2013.

  1. rdust

    rdust

    Joined:
    Nov 30, 2013
    Messages:
    1,195
    Likes Received:
    5,679
    Location:
    SE, Michigan
    Here is a load in the Princess. It's not too cold here tonight(low 30's/upper 20's) and tomorrow is supposed to warm up a bunch.(upper 40's low 50's) Loaded the stove with cherry, silver maple, a couple hickory chunks and ironwood fillers. None of these splits are particularly big so who knows how long it'll go. I hate loading the stove before work so I filled it up. I may be wasting wood due to tomorrows temps but I'll be able to sleep in though extra couple minutes! :D

    Notice the one ironwood split with the water coming out of the end, happened about as soon as I loaded it. This cracks me up, that stuff has been split since the spring 2009 and in my shed for 2 seasons! Such a small piece and still holding on to some moisture. :confused:
     

    Attached Files:

    Last edited: Dec 4, 2013
  2. bogydave

    bogydave

    Joined:
    Oct 8, 2013
    Messages:
    10,313
    Likes Received:
    37,220
    Location:
    Alaska, North of Anchorage & South of Fairbanks
    You use a hammer to get the last ones in there LOL :)
    Full load+ :thumbs:

    Cook out the water before cranking it to low.
    You'll be fine.

    We're up to 16°f now. Warmest it's been in a week +. :) :)
    Think I'll go with a full load of some birch tonight ;)
     
  3. BrowningBAR

    BrowningBAR

    Joined:
    Oct 14, 2013
    Messages:
    1,379
    Likes Received:
    2,105
    Location:
    San Tan Valley, AZ
    I always love a good BK load.
     
    Scotty Overkill likes this.
  4. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    49,296
    Likes Received:
    314,918
    Location:
    Central MI
    rdust, we too will occasionally get one that sizzles. I remember once having a couple splits sizzle and the wood had been split and stacked for like 8 years. Never have figured that out but just accept that it will happen occasionally.
     
    papadave and raybonz like this.
  5. rdust

    rdust

    Joined:
    Nov 30, 2013
    Messages:
    1,195
    Likes Received:
    5,679
    Location:
    SE, Michigan
    At the 20 hour mark stove top was 260ish, house still in the low 70's with the stove room being mid 70's(warm today). Pulled the coals/charred wood from the sides/back to the front and turned the air up. Stove top is right around 400 after about 30 minutes with the air turned up. Gonna get warm in here while I burn these coals down for the next few hours so I can load before bed.
     
    papadave and Beetle-Kill like this.
  6. rdust

    rdust

    Joined:
    Nov 30, 2013
    Messages:
    1,195
    Likes Received:
    5,679
    Location:
    SE, Michigan
    Made it 23 1/2 hours, getting tired so I reloaded. Could've made it longer if I didn't want to burn the coals down faster so I could reload. Stove top was 330ish when I reloaded.
     
    papadave and alforit like this.
  7. swags

    swags Moderator

    Joined:
    Oct 3, 2013
    Messages:
    4,455
    Likes Received:
    13,241
    Location:
    NE Ohio
    What setting and temps are you running at getting the 20+ hour burns?
     
  8. rdust

    rdust

    Joined:
    Nov 30, 2013
    Messages:
    1,195
    Likes Received:
    5,679
    Location:
    SE, Michigan
    Usually 1 3/4 will go 20-24 hours on average wood. If I run the same setting with the blower on low it's more like a 15-18 hour burn.
     
  9. rdust

    rdust

    Joined:
    Nov 30, 2013
    Messages:
    1,195
    Likes Received:
    5,679
    Location:
    SE, Michigan
    Picture of a typically t-stat setting. When it's teens or colder I may bump up to the n or o on normal, it's not often I need to burn hotter than that.
     

    Attached Files:

  10. swags

    swags Moderator

    Joined:
    Oct 3, 2013
    Messages:
    4,455
    Likes Received:
    13,241
    Location:
    NE Ohio
    What size of house are you heating?
     
  11. rdust

    rdust

    Joined:
    Nov 30, 2013
    Messages:
    1,195
    Likes Received:
    5,679
    Location:
    SE, Michigan
    Just a tad under 2K, 1100ish on the main level the rest is bedrooms upstairs. It was built in 80 so the insulation is probably average at best, windows/doorwalls were replaced in 2005 and seem decent.