In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Finally pulled the trigger...

Discussion in 'Modern EPA Stoves and Fireplaces' started by Barcroftb, May 4, 2021.

  1. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    44,675
    Likes Received:
    278,214
    Location:
    Central MI
    And it was raining when you put it in.
     
    Eric VW, brenndatomu and Barcroftb like this.
  2. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    44,675
    Likes Received:
    278,214
    Location:
    Central MI
    fwiw, when I am caught with having to put wood in stove (need to be gone for a long time and it is cold outside) but there is still a good fire I most times simply put the wood in, close up and engage cat right away. No problem so long as you have dry wood.

    Amazing it was down to 75 when I got up, but that is being taken care of.
     
  3. Canadian border VT

    Canadian border VT

    Joined:
    Feb 18, 2015
    Messages:
    17,248
    Likes Received:
    112,039
    Location:
    Vermont
    I was witness it was in NH
     
  4. Barcroftb

    Barcroftb

    Joined:
    Sep 30, 2015
    Messages:
    3,076
    Likes Received:
    17,844
    Location:
    The Mitten
    Was here too… F085D5A4-1FEC-497C-906E-9C129E260D38.jpeg

    oddly enough the outside temp has dropped 2 degrees since then.
     
  5. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    44,675
    Likes Received:
    278,214
    Location:
    Central MI
    Dropped here too. it is -3.
     
    Eric VW, Barcroftb and brenndatomu like this.
  6. Eckie

    Eckie

    Joined:
    Dec 14, 2019
    Messages:
    3,262
    Likes Received:
    16,256
    Location:
    Virginia
    Yall are making me cold just reading about your outside temps....
     
  7. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    44,675
    Likes Received:
    278,214
    Location:
    Central MI
    Just looked at ours and it reads -10.
     
  8. Barcroftb

    Barcroftb

    Joined:
    Sep 30, 2015
    Messages:
    3,076
    Likes Received:
    17,844
    Location:
    The Mitten
    So potentially new problem :headbang:

    Noticed what I thought was an excessive amount of smoke last night. So I removed cat this morning and cleaned it. Still having lots of smoke this morning after cleaning cat. For cleaning the cat all I did was blow it out with the air compressor. 59CCE776-70A2-4CD1-B6B3-7CDCDEDF4118.jpeg

    Running air at 1 notch above 1/4 open.
    0B794602-9E7C-4496-B772-3DF713FCD9AA.jpeg

    Maybe 30 minutes after reload. Heard ticks and pinging that makes me think cat is lit.
    E471F464-C69F-4C84-84C6-708E1156A6CF.jpeg

    what say you fellers?
     
  9. RGrant

    RGrant

    Joined:
    Sep 2, 2019
    Messages:
    743
    Likes Received:
    4,086
    Location:
    Connecticut
    That's a bright white smoke on my screen- I'm pretty sure that's condensation coming out of the stove off the wood. I get that sometimes too, but not for a whole heck of a lot of time.
    I'd be tempted to let it run wide open a little bit longer before running the cat and cutting the air back. Maybe another 10 minutes or so, then engage the bypass and adjust the air flow to where you want it.

    That would be my approach, we'll see what some of the other guys thing is going on.
     
  10. Barcroftb

    Barcroftb

    Joined:
    Sep 30, 2015
    Messages:
    3,076
    Likes Received:
    17,844
    Location:
    The Mitten
    It does look like steam to me too, but I wasn’t completely sure. This white ash I’m burning isn’t the driest at an average of 18%
     
  11. brenndatomu

    brenndatomu

    Joined:
    May 29, 2015
    Messages:
    21,692
    Likes Received:
    136,885
    Location:
    NE Ohio
    Agreed...getting the same cloud from the gas boiler here at work today...
     
  12. oldspark

    oldspark

    Joined:
    Jan 2, 2014
    Messages:
    2,534
    Likes Received:
    7,441
    Location:
    NW Iowa
    Yep its water vapor, get it here whens it's really cold, first time my new epa stove did that I thought i had a epa smoke dragon.
     
  13. oldspark

    oldspark

    Joined:
    Jan 2, 2014
    Messages:
    2,534
    Likes Received:
    7,441
    Location:
    NW Iowa
    Barcroftb, what was the temp of the stove when you cleaned the cat?
     
  14. oldspark

    oldspark

    Joined:
    Jan 2, 2014
    Messages:
    2,534
    Likes Received:
    7,441
    Location:
    NW Iowa
    Is 18 percent a little high for a cat stove?
     
    Eric VW, brenndatomu and TurboDiesel like this.
  15. oldspark

    oldspark

    Joined:
    Jan 2, 2014
    Messages:
    2,534
    Likes Received:
    7,441
    Location:
    NW Iowa
    I'm going through a lot of wood with this below zero south wind crap.
     
    brenndatomu and TurboDiesel like this.
  16. TurboDiesel

    TurboDiesel

    Joined:
    Nov 22, 2013
    Messages:
    16,136
    Likes Received:
    96,606
    Location:
    Hollidaysburg Pa
    The leg or the blanket?
     
  17. TurboDiesel

    TurboDiesel

    Joined:
    Nov 22, 2013
    Messages:
    16,136
    Likes Received:
    96,606
    Location:
    Hollidaysburg Pa
    I do that occasionally if I'm going to be out for several hours. Hot loading will build up a lot of extra coals though
     
  18. TurboDiesel

    TurboDiesel

    Joined:
    Nov 22, 2013
    Messages:
    16,136
    Likes Received:
    96,606
    Location:
    Hollidaysburg Pa
    18% is fine
     
  19. TurboDiesel

    TurboDiesel

    Joined:
    Nov 22, 2013
    Messages:
    16,136
    Likes Received:
    96,606
    Location:
    Hollidaysburg Pa
    Oh yeah. You'll be high-stepping for no reason. Lol
    (If everything looks closer, you feel like you're walking uphill)
     
  20. oldspark

    oldspark

    Joined:
    Jan 2, 2014
    Messages:
    2,534
    Likes Received:
    7,441
    Location:
    NW Iowa
    I am trying to use less dense wood for hot reloads, just put some elm and ash in stove, hope it helps when the excessive coling.
     
    TurboDiesel and brenndatomu like this.