It’s been standing dead for 3yrs and splits are going to be single row in the sunniest hot location of my yard. Do you think it won’t be ready? I can push it out 2 or 5 years if I have to. I’ll check a piece with the mm today and post up current level.
Staying away from firewood making today, so I tore into the 272 for a look. I could hear a muffler bolt had come loose and I wanted to look at the piston to rule that out as the culprit of bog under load. To my relief the piston and cylinder looked good. When I went to disconnect the plug wire discovered the plug was loose. Hopefully that was the cause of hard start and no power in cut. One bolt on top right would not come out of muffler bracket. It seems the nut inside muffler broke away. This is the $15 china muffler and bracket. Also have the carb kit ordered if it’s still not running right.
My youngest is going to her first prom tonight and no prom is complete without pics at a woodpile. Her look cracked me up.
Have I ever told you how much I hate working in the rain. Me and the emergency response 261 and backhoe had it cleared in no time. Shortleaf pine
Some pics of a big chunk stash that is not in my yard. Maybe haul some home tomorrow while the ground is still firm.
Is there a resolution or zoom limit on pictures? I get a security warning on some. It seems to be anything that I zoom in.
same here.....like if i take a pic of a saw sitting in the gravel parking lot ill have to zoom out or resize it....almost like too much going on with the pebbles
Yes, there is a size limit. Not zoom but over all size. I'm not exactly sure what it is but if I use my works phone for pics, they exceed that limit.
Got a little bit done today. This white oak has been laying in the yard so long it’s growing fungus. A lot of it is knotty, so the extra seasoning helps when splitting.
Yes and the bark is falling off so it’s even better. It’s going to be a struggle to fit in some personal hoarding time over the next couple days.
