In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Wanted! Walbro HDA 196

Discussion in 'FHC Classifieds' started by bigfrank, Feb 13, 2020.

  1. bigfrank

    bigfrank

    Joined:
    Mar 23, 2019
    Messages:
    588
    Likes Received:
    3,205
    Location:
    NorCal
    For my Husqvarna 350
    The one I have I beliebe to be bad Internaly. Even a known good rebuildable would be fine.

    Thanks all...
     
    M2theB, JB Sawman and J. Dirt like this.
  2. JB Sawman

    JB Sawman

    Joined:
    Mar 10, 2018
    Messages:
    1,198
    Likes Received:
    7,316
    Location:
    pennsylvania
    Hey big frank those saws had a lot of carb changes the hda196 has been changed up several times if you give me serial # of your saw i can change the number up for you and i can get a new one if you want JBsawman
     
    fox9988, farmer steve and M2theB like this.
  3. bigfrank

    bigfrank

    Joined:
    Mar 23, 2019
    Messages:
    588
    Likes Received:
    3,205
    Location:
    NorCal
    Thanks JB. I'll get the number and see what's up. Don't want to really buy a new one carb to put on this saw. Was hoping to find a good used one, but still may be able to do that if I know what the upgraded carb is. Thanks!
     
    M2theB and JB Sawman like this.
  4. JB Sawman

    JB Sawman

    Joined:
    Mar 10, 2018
    Messages:
    1,198
    Likes Received:
    7,316
    Location:
    pennsylvania
    No Problem I have no more used ones most of them were bad gas problems any way let me know JB
     
    bigfrank and eatonpcat like this.
  5. bigfrank

    bigfrank

    Joined:
    Mar 23, 2019
    Messages:
    588
    Likes Received:
    3,205
    Location:
    NorCal
    Here is the plate. One of the numbers isnt visible but in think you might be able to make it work. I think a new OEM carb is going to be a bit spendy to put on this saw. It's a fixer to flip but you xan.give me a price anyway. I know the aftermarket are hit and miss. Never used them on a 2 stroke but I know the 4 stroke carbs I have tried a couple of times didn't work that great. 20200214_151340.jpg
     
    JB Sawman likes this.
  6. JB Sawman

    JB Sawman

    Joined:
    Mar 10, 2018
    Messages:
    1,198
    Likes Received:
    7,316
    Location:
    pennsylvania
    I will check for you tomorrow but I think they are about 50.00 oem carb JB
     
  7. JB Sawman

    JB Sawman

    Joined:
    Mar 10, 2018
    Messages:
    1,198
    Likes Received:
    7,316
    Location:
    pennsylvania
    Hey big frank update carb Zama C3-EL18B on amazon [email protected] JB
     
  8. bigfrank

    bigfrank

    Joined:
    Mar 23, 2019
    Messages:
    588
    Likes Received:
    3,205
    Location:
    NorCal
    You said there might be upgrades to that carb. Any model n UK numbers? Thanks again...
    Thanks JB, I'll check it out. Imwasmthinking that carb had a primer bulb, but if it is setup for on, I guess I could cap off that circuit?
     
    JB Sawman likes this.
  9. bigfrank

    bigfrank

    Joined:
    Mar 23, 2019
    Messages:
    588
    Likes Received:
    3,205
    Location:
    NorCal
    I now see they make them both ways. At $16, I guess I can give it a try. I got it on @Amazon, so if it doesn't work right, I can send it back. Thanks again!
     
    eatonpcat and JB Sawman like this.
  10. JB Sawman

    JB Sawman

    Joined:
    Mar 10, 2018
    Messages:
    1,198
    Likes Received:
    7,316
    Location:
    pennsylvania
    Good luck big frank it would have cost more to send you a used one and a rebuild kit seems crazy you can buy a new one for that glad I could help JB
     
    fox9988, bigfrank and eatonpcat like this.
  11. bigfrank

    bigfrank

    Joined:
    Mar 23, 2019
    Messages:
    588
    Likes Received:
    3,205
    Location:
    NorCal
    I know the aftermarket carbs can be hit or miss, but i guess it's worth a try. At least I can tune it with a tach and it's easier to tell if it's rich or lean on a 2 stroke. Thanks again for the help.
     
    eatonpcat likes this.
  12. david young

    david young

    Joined:
    Oct 8, 2014
    Messages:
    64
    Likes Received:
    129
    Location:
    Vermont
    I’ve had good luck with those specific carbs. That’s the way I would go.
     
    bigfrank likes this.