Took down a Maple snag the other day. Went up to finish bucking this afternoon. Plan was to use the 360 to limb and the 500 to finish bucking. Found the 500 wouldn’t cut at all as I forgot to sharpen what was a very dull chain. Fortunately the little 360 was up to the task. The 360 is a good running saw but not a fan of the one bar but on the clutch cover. If tends to let the chain get loose if not tightened properly as happened here. Quite a few standing snags left to get on the ground. Sent from my iPhone using Tapatalk
Always nice to have a second saw on hand. I was cutting last Wednesday and my little arborists saw acted up. Wish i had a second with me. Some nice looking rounds as always Reloader
My idea of a 2 saw plan is one in each hand, other than that I’m approaching a 12 saw plan. Looks like I may need a 12 step program.
If you have only one saw with you, you'll need a second. If you have 2 saws, you'll only need to use one. Thank you Mr Murphy.
I watched a guy stick 2 saws then he had the guts to ask to borrow one of mine! I cut him free, didn’t want to see my saw pick up his bad habits.
