New Sugihara bar for my 372

I bought this bar a couple of months ago when it was on sale. Finally got around to putting it on yesterday. So far I like it.

I'm not much of a video maker, but I did do a short review on it here...

 

That’s the same bar as I run most of the time on my 372. I like it

 

Looking forward to bucking up those logs in the background when the rain stops. I'll get a better idea of how the bar performs. But so far, with just a few cuts on it, I like it.

 

I’ve been using two of those Sugi bars, a 20 inch and an 18 inch, for a couple years. I really like em. I have yet to dress either bar, and they have a lot of miles.

 

Is the Sugihara the same brand/company as Tsumura? They look similar and would like one for my Echo CS590 Timberwolf but the only one I can find is the Tsumura.

 

Different company. I was going to buy the Tsumara, but the driver count was less on the 28" bar than the Sugihara, and I have lots of chains that had the right driver count for the Sugihara. Plus, I talked to a couple of guys that were in the timber industry, and they liked they recommended the Sugihara. That sealed the deal. I doubt you would go wrong with either. The reviews are great on both.

 

Maybe this one would work for your Echo?

 

That is great info on that bar bigfrank

 

Sugiharas are generally a Stihl mount pattern . They come with adaptor rings for various other makes of saw . Tsumura makes bars for various makes of saws . Both companies make an excellent product . Also , look for Total brand bars . They are Tsumura bars and sometimes can be had for a better price .

 

Is this a typo? Sugi makes plenty of small and large mount Husqvarna bars.

 

Exactly......more internet misinformation

 

I also run a 24 inch sugihara on my 372. Absolutely no complaints here.

 

Where ever there's a sale. Woodcuttersgarage is where I got my 2. Steve's a good guy to deal with. I've seen 'em as the deal of the day on ope too. Today the Husky branded bars are on there: OEM Husqvarna 272XP, 372XP, 395XP, 562XP, 572XP 24'' Bar, HT380-84 Dl 3/8'', .050''


https://www.woodcuttersgaragellc.com/

 

372 is large mount, K095 is small mount (for smaller saws). You don't want the K095.

Leave him a note when you order stating it's for a 372 for added insurance.

 

HLSupply is where I got 3 of mine. Watch their “deal of the day” plus seems like they have a good sale around every holiday.

 

Those Sugi bars are just plain sexy looking in my book. Got em on 4 out of my 5 saws.

 

I got them in 20" and 24" , really nice bars .