In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday
  1. The Annual Tradition is Back!!!! It's time for our Annual Firewood Hoarders Club Secret Santa Gift Exchange! Deadline is: Sign Up will be closed on Saturday November 9th at Midnight (central time) Official FHC 2024 Secret Santa Gift Exchange

NEW Stihl 661

Discussion in 'Chainsaws and Power Equipment' started by ja_cain, Dec 26, 2017.

Page 1 of 2
  1. ja_cain

    ja_cain

    Joined:
    Nov 7, 2015
    Messages:
    113
    Likes Received:
    319
    Location:
    Chesterfield, VA
    After hijacking/mucking up Ralphie Boy's thread, I decided to start my own 661 thread.

    Other than the bar oil I ultimately want to run, I think I have everything I need to do a first run. I went ahead and ordered some biodegradable Motion Lotion because I couldn't find anything else loke this around here. I plan on sourcing some eco friendly tackifiers to add to my fractionated coconut oil.

    I think I am going to go ahead and mix my first batch of gas at 40:1 with the Maxima K2 oil I have on hand. I might mix up another 5 gallons at 32:1 for when I am milling with the saw.

    I may go ahead and do MM before I start milling with the saw so it is better able to remove heat. I also ordered a max flow setup which should facilitate better breathing and filtration over the stock setup.

    Some of the wood I am going to possibly mill will be kind of dirty from a year of sitting in one spot. Thinking about running a good semi-chisel chain that should hold up better with all thw grit that will be present.

    Definitely open to any advice or feedback pn what I propose to do. it would be much appreciated!

    Here are some pics that are relavent to this thread.

    Justin
    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]

    Sent from my SM-G930V using Tapatalk
     
    ja_cain, Dec 26, 2017
    #1 Top
    Hammy, Dakota Hoarder, Screwloose and 9 others like this.
  2. SAWMIKAZE

    SAWMIKAZE

    Joined:
    Mar 16, 2015
    Messages:
    226
    Likes Received:
    929
    Location:
    PGH
    Only suggestion I have on the saw part is to knock in the pin so you get some more oil on the bar..have fun.
     
    SAWMIKAZE, Dec 26, 2017
    #2 Top
    Hammy, Shawn Curry, Screwloose and 8 others like this.
  3. ja_cain

    ja_cain

    Joined:
    Nov 7, 2015
    Messages:
    113
    Likes Received:
    319
    Location:
    Chesterfield, VA
    Will do! Thanks for reminding me!

    Sent from my SM-G930V using Tapatalk
     
    ja_cain, Dec 26, 2017
    #3 Top
    Hammy, Screwloose, Horkn and 1 other person like this.
  4. tamarack

    tamarack

    Joined:
    Mar 20, 2015
    Messages:
    1,286
    Likes Received:
    6,667
    Location:
    paulina oregon
    Nice saw! Im mostly a husqvarna fan but i do got to admit the 661 is good looking saw. Much sexier than than the 660/066. Im sure with late model ones are devoid of the issues that ralphy boy had with his.
     
    tamarack, Dec 26, 2017
    #4 Top
    Hammy, Screwloose, Horkn and 4 others like this.
  5. Moparmyway

    Moparmyway

    Joined:
    Sep 3, 2014
    Messages:
    846
    Likes Received:
    1,953
    Location:
    New York
    Do the muffler mod asap ......... 2016-04-18 06.22.25.jpg
     
    Moparmyway, Dec 27, 2017
    #5 Top
    Hammy, Screwloose, Horkn and 3 others like this.
  6. ja_cain

    ja_cain

    Joined:
    Nov 7, 2015
    Messages:
    113
    Likes Received:
    319
    Location:
    Chesterfield, VA
    10-4! I wan't to put it in some big oak first and time the cuts before I mod it. Thanks for the pics and video!
     
    ja_cain, Dec 27, 2017
    #6 Top
    Hammy, Screwloose, Horkn and 2 others like this.
  7. Ralphie Boy

    Ralphie Boy

    Joined:
    Oct 25, 2014
    Messages:
    4,139
    Likes Received:
    28,939
    Location:
    Rabbit Hash, Kentucky
    No not modify it until the warranty has expired!
     
    Ralphie Boy, Dec 27, 2017
    #7 Top
    Hammy, Dakota Hoarder, Shawn Curry and 7 others like this.
  8. Blazing

    Blazing

    Joined:
    Mar 16, 2015
    Messages:
    385
    Likes Received:
    2,006
    Location:
    Sutherland Virginia
    20170216_133833.jpg 20170216_132209.jpg
    Yeah next time buy it from a guy who ports saws so you never have one lol.
     
    Blazing, Dec 29, 2017
    #8 Top
    Hammy, SAWMIKAZE, Screwloose and 6 others like this.
  9. ja_cain

    ja_cain

    Joined:
    Nov 7, 2015
    Messages:
    113
    Likes Received:
    319
    Location:
    Chesterfield, VA
    I remember telling Randy I was going to send him one when these saws were first announced. If I ever get my 395 running, I'll probably bite the bullet. Will definitely wait till the warranty is out though.

    I have Makita 6421, brand new Mahle p/c and the hd filter kit. My go ahead and send that to him. Would be intersting to see how a ported 7900 compares to this saw.

    Btw, nice looking saw! Were did you get the bar?

    Sent from my SM-G930V using Tapatalk
     
    ja_cain, Dec 30, 2017
    #9 Top
    Screwloose and Horkn like this.
  10. Blazing

    Blazing

    Joined:
    Mar 16, 2015
    Messages:
    385
    Likes Received:
    2,006
    Location:
    Sutherland Virginia
    From what I hear he ports a mean 395 and 7900. I've got three done so far and ordered another when they are released. Thanks! I haven't had much time to run it but she is a beast for sure. Idk if you know redbull661 on the other forums but he had the bar new got it from him. It's a 36 in .063 which is supposed too carry more oil. I'm running an 8 pin and have the oil pin knocked in and turned all the way up.
     
    Blazing, Dec 30, 2017
    #10 Top
    Hammy, Screwloose, Horkn and 2 others like this.
  11. ja_cain

    ja_cain

    Joined:
    Nov 7, 2015
    Messages:
    113
    Likes Received:
    319
    Location:
    Chesterfield, VA
    Cool. Looking forward to sending one of these saws to him eventually. Will definitely be doing the oiler mod. Thanks for reminding me.

    Sent from my SM-G930V using Tapatalk
     
    ja_cain, Jan 3, 2018
    #11 Top
    Hammy, Screwloose, Horkn and 1 other person like this.
  12. ja_cain

    ja_cain

    Joined:
    Nov 7, 2015
    Messages:
    113
    Likes Received:
    319
    Location:
    Chesterfield, VA
    More goodies arrived today. Can't wait for this cold weather to let up some so I can have some fun. :)
    [​IMG]

    Sent from my SM-G930V using Tapatalk
     
    ja_cain, Jan 3, 2018
    #12 Top
    Hammy, Moparmyway, Screwloose and 3 others like this.
  13. Fabz

    Fabz Banned

    Joined:
    Jan 30, 2017
    Messages:
    802
    Likes Received:
    1,150
    Location:
    Buffalo ny
    EBECE0FE-1142-4799-B644-B1E53A3D04C5.jpeg
    and ...he never restored my account on Ope like he said he would
     
    Last edited: Jan 3, 2018
    Fabz, Jan 3, 2018
    #13 Top
    ja_cain likes this.
  14. Sutphenj14

    Sutphenj14

    Joined:
    Dec 4, 2017
    Messages:
    18
    Likes Received:
    74
    Location:
    Grand Rapids
    I've got a 661 and have done some light milling and for some reason has become my go-to firewood saw. Your going to love it.

    What's the max flow set up? I'm a newbie to saw mods. Thanks

    Btw I like the pic of the gas pump....
     
    Sutphenj14, Jan 3, 2018
    #14 Top
    Hammy, Screwloose, Horkn and 1 other person like this.
  15. blacksmith

    blacksmith

    Joined:
    Jun 2, 2016
    Messages:
    1,365
    Likes Received:
    7,018
    Location:
    central Pa
    That thing cuts like a boss! Is the muffler mod the only thing done to it or is there a few other things? After I demanded that the saw shop that I purchased my saw from put all new updated electronics on it I've had not one problem what so ever and couldn't be happier. I did however put an 8 pin sprocket on it which sped up the cut. I'd definitely want to do a muffler mod here at some point in the near future. My warranty is about out so time to open it up and make it run!
     
    Last edited: Jan 3, 2018
    blacksmith, Jan 3, 2018
    #15 Top
    Hammy, Screwloose, Horkn and 1 other person like this.
  16. Canadian border VT

    Canadian border VT

    Joined:
    Feb 18, 2015
    Messages:
    17,213
    Likes Received:
    111,734
    Location:
    Vermont
    Pretty saws..:drool:
     
    Canadian border VT, Jan 3, 2018
    #16 Top
    Hammy, Screwloose, Horkn and 1 other person like this.
  17. ja_cain

    ja_cain

    Joined:
    Nov 7, 2015
    Messages:
    113
    Likes Received:
    319
    Location:
    Chesterfield, VA
    That's some beautiful work right there! I can't believe emu legs didn't restore your account! Lol!

    Sent from my SM-G930V using Tapatalk
     
    ja_cain, Jan 3, 2018
    #17 Top
  18. Fabz

    Fabz Banned

    Joined:
    Jan 30, 2017
    Messages:
    802
    Likes Received:
    1,150
    Location:
    Buffalo ny
    Well ... that’s on el moobs ... I can only speak for myself here : when I say I’m going to do something ... I DO it !!!
     
    Fabz, Jan 3, 2018
    #18 Top
  19. Fabz

    Fabz Banned

    Joined:
    Jan 30, 2017
    Messages:
    802
    Likes Received:
    1,150
    Location:
    Buffalo ny
    Fabz, Jan 3, 2018
    #19 Top
    ja_cain likes this.
  20. ja_cain

    ja_cain

    Joined:
    Nov 7, 2015
    Messages:
    113
    Likes Received:
    319
    Location:
    Chesterfield, VA
    Looks to be an upgrade to the Stihl HD setup. I can't wait to run it in some big wood.

    Sent from my SM-G930V using Tapatalk
     
    ja_cain, Jan 3, 2018
    #20 Top
    Hammy, Screwloose and Horkn like this.
Page 1 of 2