In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Lesson #1...Doh!

Discussion in 'Pellet Stoves, Pellet Fireplaces, Pellet Furnaces' started by kdp7462, Oct 11, 2015.

  1. kdp7462

    kdp7462

    Joined:
    Oct 20, 2014
    Messages:
    45
    Likes Received:
    174
    Location:
    maine
    With the stove going for about a week, I decided to pull the burn pot apart, clean and dump the ash pan yesterday. Probably didn't need to dump ash, bit did while I was in anyway.

    Dealer said that you almost can't put the burn pot/shield back together wrong....Well, leave it up to me to find a way! The flame shield was not sitting against the pellet shute enough and had pellets going behind and down to the ash pan and burn pot. Came home at midnight to a semi cold house and full burn pot of unburnt pellets. Stove flashing #3.

    Took a bit to figure out what was up, but I'll be sure to secure the pot better next time!
     
    kdp7462, Oct 11, 2015
    #1 Top
    ivanhoe, bogieb, eatonpcat and 4 others like this.
  2. IHATEPROPANE

    IHATEPROPANE

    Joined:
    Oct 13, 2013
    Messages:
    4,671
    Likes Received:
    19,077
    :doh:

    No harm no foul. Lessons learned. Next time you will be warm and toasty :fire:
     
    IHATEPROPANE, Oct 11, 2015
    #2 Top
    ivanhoe, bogieb, imacman and 5 others like this.
  3. jtakeman

    jtakeman Moderator

    Joined:
    Oct 4, 2013
    Messages:
    12,196
    Likes Received:
    54,975
    Location:
    NW CT foothills
    Better it happened now and ya learned from it. ;)

    Over the years I've learned to check and double check as I too have done a few oopsie's!! :whistle:
     
    jtakeman, Oct 11, 2015
    #3 Top
    wildwest, ivanhoe, bogieb and 3 others like this.
  4. ttdberg

    ttdberg Pellet Pig

    Joined:
    Apr 3, 2014
    Messages:
    3,592
    Likes Received:
    15,987
    Location:
    CT
    X2 - Especially better now when the weather is still fairly mild, as opposed to icy cold February!
     
    ttdberg, Oct 11, 2015
    #4 Top
    ivanhoe, wildwest, IHATEPROPANE and 1 other person like this.
  5. wildwest

    wildwest Moderator

    Joined:
    Jul 21, 2014
    Messages:
    30,146
    Likes Received:
    141,406
    Location:
    Wyoming high plains
    like the ash pan caught on fire?
     
    wildwest, Oct 11, 2015
    #5 Top
    imacman and ivanhoe like this.
  6. kdp7462

    kdp7462

    Joined:
    Oct 20, 2014
    Messages:
    45
    Likes Received:
    174
    Location:
    maine
    No, the control board was flashing #3 error code.
     
    kdp7462, Oct 11, 2015
    #6 Top
    ivanhoe and wildwest like this.
  7. wildwest

    wildwest Moderator

    Joined:
    Jul 21, 2014
    Messages:
    30,146
    Likes Received:
    141,406
    Location:
    Wyoming high plains
    Phew!! for you :)

    I was hoping I was not the only that had the ash pan that caught on fire, guess not :whistle:
     
    Last edited: Oct 11, 2015
    wildwest, Oct 11, 2015
    #7 Top
    imacman, ivanhoe, bogieb and 2 others like this.
  8. ivanhoe

    ivanhoe

    Joined:
    Oct 18, 2013
    Messages:
    2,981
    Likes Received:
    11,868
    Location:
    Northern Ontario
    :smoke: You had a puff of smoke hoping someone would be in the same boat as you, not gonna happen!:rofl: :lol:
    Edit; not a laughing matter:zip:
     
    ivanhoe, Oct 12, 2015
    #8 Top
    imacman, wildwest, bogieb and 1 other person like this.
  9. wildwest

    wildwest Moderator

    Joined:
    Jul 21, 2014
    Messages:
    30,146
    Likes Received:
    141,406
    Location:
    Wyoming high plains
    cute pun!
     
    wildwest, Oct 12, 2015
    #9 Top
    ivanhoe and imacman like this.