In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

For Sale - Olympyk 264 F De Luxe

Discussion in 'Closed Ads' started by Guido Salvage, Jan 31, 2014.

Thread Status:
Not open for further replies.
  1. Guido Salvage

    Guido Salvage

    Joined:
    Oct 5, 2013
    Messages:
    1,735
    Likes Received:
    4,938
    Location:
    The heart of the Bluegrass
    I am offering an Olympyk 264 F De Luxe for sale that I picked up and do not need, this saw is in good shape and runs well. It is currently pushing 195+ pounds of compression on my gauge and if you have the grunt to pull it over will often start on the first pull. It is a 61 cc saw and currently has a 20" Oregon bar and junk safety chain on it. Below are the the small issues I have found with it:

    * One of the dog bolts is not original
    * The AV bolt near the carb needs a nut on it
    * The bar slot is not wide enough for the saw, I did widen it a bit with a file but would suggest getting the proper bar and a decent chain
    * The clutch cover has cracks in it, probably as a result of the wrong bar noted above
    * The chain brake is not functioning
    * There is a small piece missing from the top cover behind the starter handle

    Asking $150 and the ride to your door. I accept PayPal, if you do it other than a gift be sure to make me whole. Below are some pictures, others are available on request.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Guido Salvage, Jan 31, 2014
    #1 Top
    HoneyFuzz likes this.
  2. Guido Salvage

    Guido Salvage

    Joined:
    Oct 5, 2013
    Messages:
    1,735
    Likes Received:
    4,938
    Location:
    The heart of the Bluegrass
    If I dropped the price to $140 could I get any interest?
     
    Guido Salvage, Feb 7, 2014
    #2 Top
  3. HoneyFuzz

    HoneyFuzz

    Joined:
    Jan 20, 2014
    Messages:
    4,484
    Likes Received:
    14,831
    Location:
    Northeast , Ohio
    Thats a sweet deal . Crazy compression !
     
    HoneyFuzz, Feb 7, 2014
    #3 Top
  4. Jon1270

    Jon1270

    Joined:
    Oct 4, 2013
    Messages:
    1,886
    Likes Received:
    4,543
    Location:
    Pittsburgh, PA
    I'd never heard of Olympyk before, and I bet many others haven't either. Looks like it was a quality saw for its day, whenever that was. What is parts availability like?
     
    Jon1270, Feb 8, 2014
    #4 Top
  5. Certified106

    Certified106

    Joined:
    Oct 17, 2013
    Messages:
    4,172
    Likes Received:
    11,911
    Location:
    In The Hills
    Is it actually manufactured by Olympyk? Or is t rebranded and made by someone else?
     
    Certified106, Feb 8, 2014
    #5 Top
  6. Guido Salvage

    Guido Salvage

    Joined:
    Oct 5, 2013
    Messages:
    1,735
    Likes Received:
    4,938
    Location:
    The heart of the Bluegrass
    The saw was manufactured by Olympyk. They used the name Olympic and Olympik as well. The various name were caused by trademark issues with the International Olympic Committee (the sports body). They later morphed to Oleo-Mac and are known today as Efco. The green John Deere CSxx series of saws are made by Efco. Parts are available if you look.
     
    Guido Salvage, Feb 8, 2014
    #6 Top
    clemsonfor, HoneyFuzz and mdavlee like this.
  7. Guido Salvage

    Guido Salvage

    Joined:
    Oct 5, 2013
    Messages:
    1,735
    Likes Received:
    4,938
    Location:
    The heart of the Bluegrass
    Look at the compression on this saw, price drop to $130 plus the ride to your door. If no takers at that price it will go one the shelf for GTG's.
     
    Guido Salvage, Mar 2, 2014
    #7 Top
  8. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,632
    Location:
    Northeast Oh
    Guido, I wish I could. This is one you don't hear much about. Looks good and I'm sure it runs good.

    At 61 cc I would bet that it makes my beloved 036 run for help! :)
     
    DexterDay, Mar 2, 2014
    #8 Top
  9. Pallet Pete

    Pallet Pete Moderator

    Joined:
    Oct 2, 2013
    Messages:
    13,474
    Likes Received:
    54,059
    Location:
    Ovid
    I just bought a saw from sean. Otherwise.... its a nice looking saw for tue price.
     
    Pallet Pete, Mar 3, 2014
    #9 Top
  10. Guido Salvage

    Guido Salvage

    Joined:
    Oct 5, 2013
    Messages:
    1,735
    Likes Received:
    4,938
    Location:
    The heart of the Bluegrass
    Saw is sold, a few dozen more to go.
     
    Guido Salvage, Mar 20, 2014
    #10 Top
    Carbine and HoneyFuzz like this.
  11. Jon1270

    Jon1270

    Joined:
    Oct 4, 2013
    Messages:
    1,886
    Likes Received:
    4,543
    Location:
    Pittsburgh, PA
    Olympyk has found a family. Good night, Olympic!
     
    Jon1270, Mar 20, 2014
    #11 Top
    DexterDay and HoneyFuzz like this.
  12. Carbine

    Carbine

    Joined:
    Feb 2, 2014
    Messages:
    1,224
    Likes Received:
    3,864
    Location:
    Ohio
    Good deal for someone. Keep them coming Gary, seems like there is a streak going on here lately.
     
    Carbine, Mar 20, 2014
    #12 Top
    clemsonfor, DexterDay and HoneyFuzz like this.
  13. MasterMech

    MasterMech The Mechanical Moderator

    Joined:
    Oct 2, 2013
    Messages:
    9,648
    Likes Received:
    26,024
    Location:
    Greenville County SC
    Always nice to see saws offered that are a bit apart from "mainstream".
     
    MasterMech, Mar 21, 2014
    #13 Top
    clemsonfor, Carbine, DexterDay and 2 others like this.
  14. MasterMech

    MasterMech The Mechanical Moderator

    Joined:
    Oct 2, 2013
    Messages:
    9,648
    Likes Received:
    26,024
    Location:
    Greenville County SC
    Bump
     
    MasterMech, Apr 3, 2014
    #14 Top
  15. Guido Salvage

    Guido Salvage

    Joined:
    Oct 5, 2013
    Messages:
    1,735
    Likes Received:
    4,938
    Location:
    The heart of the Bluegrass
    No bump needed, this one is sold. However, you can bump the 017.
     
    Guido Salvage, Apr 3, 2014
    #15 Top
    MasterMech likes this.
Thread Status:
Not open for further replies.