seems to be working fine. tore the whole thing apart did a deep cleaning and reset the control box, cleaned hopper and cleaned vac tube. so one...
I dont think so. the auger stops during what seems like a shutdown, then restarts when flame is just aboout out, then restarts - over and over
Last full cleaning about 2 weeks ago. Pellets aren't an issue. I recently changed the vac switch - honestly I cant remember if the prob started...
Last year or so seems like I'm slowly rebuilding. New issue - starts normal then evert 5-10 minutes stops feeding, flame gets very low to the...
nah It always stopped feeding as soon as the door was open. Still odd how it was noticed that the stove continually fed when I switched on the...
can it be unstuck? or order new one?
Initially it did that - but continually fed beyond the normal (load- fire up - start feeding after it gets to temp). Now fired up fine but will...
This AM stove ran out of pellets. Filled hopper and turned thermost up. Realized a few min later the stove is still feeding pellets w no fire....
switched back to the short 11 blade impeller. flame varies more (can get a little lazy at times) but heat is much better.
I saw that. Stopped there to ask and he gave me a free ripped bag to try.
Imacman where in hudson valley are you? Im in cornwall
No oak, no spark arrestor. Motor bad?????
Not saying I need to have it wide open. what I am saying is that the set screw is not limiting the adjustability. A rivit hits the very top of...
do this all the time. trap door is good.
I know as I read all the good reviews before purchasing. That said (and im sure you hear this all the time and think im prob wrong) the stove was...
Is the "set screw" supposed to limit how far you can open the control rod or the rivit it hits?
The outer casing of the stove doesnt match up well with the hole in the chamber for the combustion blower making removal and install a bit of a pain.
I cleaned it pretty good, esp because I was taking it apart around that time playing around w the combustion motor. The smaller blade impeller I...
can the new motor/impeller decrease temp if it is moving more air?
Castle is not pumping out the heat this year, and im blowing threw pellets. I picked up 3 tons of timber heat and the heat is not good. I will...
