I use a drop spreader. I also mix old coffee grounds into the ash. Coffee grounds are high in nitrogen and help to break down the mulched leaves...
I don’t have a garden so not too concerned about the lead and my kids are old enough that they don’t eat dirt anymore haha. My backyard has a...
I have a wood stove and use the ash from the stove in my yard to fertilize and keep the moss to a minimum. Wood ash works just as good if not...
FIXED!!! - So just to catch up and then close out this issue here's what I did: The first carb was shot. Gas was left in the saw for 2 years and...
I have burned through 1 and 1/2 tanks of gas trying to adjust this saw. I have the spline tool and adjusted the carb. Initial setting was 1 and...
I will try that next I guess. I have new air filters from the carb kit I bought a few days ago.
[MEDIA]
I mixed new gas and had the same issue, changed the gas cap with the vent in it and same issue and the air filter is clean. I will try and post a...
I replaced the new fuel line with another new fuel line that the ID looks bigger and had the same issue. Next I replaced the new black fuel filter...
I did not replace the plug but I did pull it and cleaned it off. It had some carbon on it and blew it off with carb cleaner. Did not think to...
I am going to get a larger diameter fuel line since it seems that it may be fuel delivery as the problem. Any comments on whether a cotton fuel...
I hope the pictures above help to determine if the piston is the issue. Any comments??
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
When I adjust the H screw further out it stutters and dies and then I can not get it started unless I turn the H screw back in. Currently the H...
I have tried everything but can’t get my chainsaw to run properly and looking for help. I have a Poulan Pro 42cc 18” model 4218a it is 3-5 years...
