Steve is definitely one of the good ones ,Must be a Wisconsin thing … I’ve told him not to go real crazy on the 044’s compression . I figure that...
And , this is a torn dow 10mm 044 that eated it’s bearing retainer . All the parts to reassemble it are on order .OEM except the piston ,which...
This is a 350/346 thar I had Stump Shot do porting and some machine work on . Should be a great light saw gonna run 20” .325 nk bar and chain on...
To the Op ..page 42-43 of the ms271 owners manual cover cleaning your filter .
That gate is 12’ long . So, yep about 2 and a bit .
Just my $.02 , buy a new OEM . Then try washing the old one in warm water with a bit of dish soap . The filter looks like it’s made to be cleaned...
I really like the way you guys have come up with to stack splits . I’ve been cribbing the ends for so long that I find it quick and easy . Have 6...
That’s pretty much what I do . I have Labs that like to ride in the truck . They aren’t the neatest rear seat passengers . So, I have an...
I’d go with the 620 and never give it another thought .
Hope I’m not stepping on forum toes here . But, there is a thread over in the chain sub forum of OPE . My personal 2 centavos …. If I really want...
As has been said , likely wood chips wedged in the nose of the bar . I take the saw ( not running ) and put the nose of the bar on a log with...
I wear the thinnest leather gloves I can find . For me personally , any extra insulation ,or padding in the gloves , and I may as well wear oven...
^^^^^ Should have said real Tygon :salute: . The knock off stuff is definitely nasty when itgets some time on it .
I use a lot of Echo 3/5 mm black line for replacement where it will fit . Never had a failure with it . Have also used the Husq. Pigtails...
The MS460/461 have more grunt than the 462 . But, they are heavier . I run a20” lightweight bar ,and occasionally a 24” bar . The 460 , 461 wear...
That’s a very nice saw. It’s worth the time , effort ,and expense to get it running . It’ll put a smile on your face when you hear it running .
Had the Kub. Dealer install top and tilt when I bought the tractor . As stated above , comes in handy . It also allows me to run my stump...
Rubbing ( isopropyl ) alcohol works as good ,or better than anything that I have used ,and not nearly as harsh/hazardous as chemicals used for...
They should pull the chains well . Watch to be sure the saws are oiling the bar well . Just fwiw info here that , you likely know ….. skip has...
I generally run 16” .325 bars on my 50cc saws . But, I have run 20 .325 narrow kerf set ups on a couple of 029-390 ,and 350-346 saws . Works well...