Great job on saving an old unit! It looks like a St Croix of sorts. I second the comment about the Versa- grate design. Our Prescott St Croix...
In my case exhaust was just disassembled and cleaned, suspect POF disk is slow to trip, this two startup attempts to get auger to start auto...
When you say hi limit disk is bypassed are you referring to proof of fire snap disk on exhaust manifold? I have one of these in garage and it's...
I'm assuming the LED within the control module is not turning green and then red when thermocouple reaches it the millivolts needed for steady...
We've been running a used Prescott EXP (2004 vintage) since 2014 with many different brands of cheap pellets. Never seen a clinker and this is...
Please check that feeder pivot bushings are lubed and operate freely. Seen those bound up before which can slow auger down. Also check that...
Have you replaced an auger motor recently? I believe some P68's use 4 RPM gearbox others use 6 RPM. Your output difference falls along this 2/3...
I don't recall my P61 ever doing that pulse without an OAK, but since installing it kind of annoying. Noticed same observations about cleaning...
I really like St Croix stoves, Auburn is a real solid unit. If it were mine I'd hook up the leaf blower to the exhaust with the stove door open...
I'm burning high ash pellets with a Prescott and stock burn pot. Hasn't been shut off in 2 months, just a weekly burn pot scrape, ash pan dump,...
Mine is running othereise I'd check, but I'm quite certain my Prescott has a clevis pin, it never holds up ash removing rod assembly. If ash rod...
Snapped close (inward) when running.
Nice job Don. I've never tried the upgraded gearbox with the zerk, but have repacked a couple with fresh grease. Always seems a bit noisy to me...
Nice fix. I've never had a chirp issue on my Prescott, maybe because its lubed up. However the burnpot motor sure is a noisy damm thing, curious...
Nice furnace unit, but some have a tendency to burn up (crack, warp, bubble, or holes enlarge) firepots which are rather expensive. Definitely...
All PC45 units had presurized igniters as far as i know. Small hole exhaust plate just cuts down on amount of air blown out the exh. I use it to...
Thanks Jtakeman. PC-45 was my first pellet stove and got me hooked on them. Will never sell it, been in two different homes, runs great and...
PC-45 shares chassis with P61. P43 has same chassis as P38. Do you plan on burning pellets or something else like corn, cherry pits, mix of the...