The stove needs to cleaned and coated after each heating season. I add DampRid inside, plug exhaust and still have a dehumidifier close by.
Been fortunate to have pellet manufacturing close to me in Southeast WI. I do a spring purchase at 179.00/ton all the time. Dejno's has been a...
I am located in Southern WI. Have a Fahrenheit 50 for last 5 years. If you need info email me. [email protected]
I would look into running a pellet furnace system as it puts out the most heat and you have only one unit for maintenance . Balancing the heat is...
Maximus... My house was built in 1863 and is 2,200 sq ft. Talk about heating a corncrib. I made improvements to all windows and doors. I also...
Why wouldn't it make sense to lower heat levels if you can. You save fuel and less stress on the pot assembly. My furnace is 6 going on 7 years...
I soak my parts in hot water with dish detergent. Been doing it for years. Minimal cleaning with a brass brush.
The pellets are made in Kenosha, WI. Brand is Dejno's and they use alot of dry flooring material. I have experimented with 5 different brands...
I cleaned my furnace today and did full blower treatment to ductwork also. Pulled all parts from inside and soaked in hot soapy water. Fired up...
I have been reading my heat settings for the last three years. Using the same pellets from WI manufacturer. My readings come from a digital...
I pull the pot parts out and clean. You have to be in a maintenance pot removal mode to do this. Once you do operator initiated shutdown you are...
Has anyone figured out a way to lessen the shutdown time before cleaning. It takes 5 hours to complete. I clean every two weeks and do a full...
Thanks for the pictures. How easy is the modification?
I started monitoring last year because my house was not as warm as previous years. I use a Nicety DT 1312 K Type Digital Thermometer. I have a...
Anyone own the extended hopper for furnace? I want to leave for a day or so and not have to play pellet filler!
My usage is 90% pellets and 10% oil during cleanings only.
Just comparing how often you perform shutdown and cleanings. I do a quick clean every two weeks and remove the burn pot parts and soak in hot...
You can go to Fahrenheit website and download the manual for free. You also need a back draft damper going to main furnace. They also recommend...
Need a good grill brush and chimney brush to clean out. Check the airflow holes in back of ash pan drawer. I use plumbing strap to run up sides...
