I have a similar set up I got from Lee Valley Tools a number of years ago. It came with a few different vacuum hose adapters along with different...
Sorry for the late reply, I have been busy with other work. My tests on the board were inconclusive unfortunately, but thank you for the picture....
That is very much a shingle mill. The wedge mounted on the blade and the block turning table are also clues. I have a DesJardins shingle mill with...
Nice wood. I always appreciate when a log gets turned into lumber instead just fire wood. A load I bought for the cottage has a whole lot of birds...
The corn is relatively clean. There is the odd piece of stalk or cob that shows up but they are easily picked out. There is also some dust but...
Had another thought. Do you have a heat recovery ventilator (HRV) in your house or do you have a combustion air supply to the appliance? Curious...
Never spent time in Douglas but I drove through it a few times. Sorry, don't know Mr. McCarty. It's a small world, just not that...
I meant to say "in the chimney" not "to the chimney". Since you are in "Northern Ontario", though not sure exactly where you are, you probably...
Is your 7" factory chimney inside a warm space or just attached to the outside of the house? The issue with factory chimneys is that they cool off...
It's a stone's throw East of Carleton Place. It's on the map and has an almost famous pub,:cheers:, too.
This is the end of my rant about this. Courier companies are among the worst at gouging. For bring parts across, either DIY or have it shipped...
Oh, I know the parts are available for less. I am just freakin' appalled at the gouging, is all. And not just for pellet stove parts either! :hair:
Mine has the same board. Amongst the four Triacs, there are two types. Two are through hole mounted vertically and the other two are surface...
This may be a really obvious thing but have you cleaned the chimney flue completely? My stove vents into a 6" Security chimney via a 4" pipe. I...
I have an Enviro Omega that I think is a pretty good unit. Mostly happy with it and I have been running it for 5 years (?) or so with few issues....
Thanks for the warm welcome guys. Yup, got beer. Not real happy with my Omega right now, though. I will post over in the stove section about that.
Thought I would put in my 2 cents worth on this since it's sort of local. Corn is available bulk from Momac grains in Fallowfield. A week ago it...
