The wood shed is around 50 ft away, but I have pallets of wood spread out in different locations up to 1500 ft away.
I would hold off on splitting for at least a couple of weeks. You will stress the injured arm if you are using the other arm heavily.
Looks like 2 or 3 of the chains can be square filed. Great for clean wood!
Where skip chain works shines is with longer bars/bigger wood. It is grabby with limbs/smaller wood. With a standard length bar recommended for...
This is the one from Harbor Freight I was referring to: [IMG] Large rounds on edge will center on the center tubes. If you flip the round flat,...
For about 1/3rd the cost, you can get a 2 wheel dolly/hand truck from Harbor Freight with a fold down extension which will do basically the same...
What system will allow you to get it done with the minimal amount of wood handling? - Will you be splitting where the logs are being cut or next...
- Try going a little slower so the deck won't bounce as much. - Keep the deck set to where it cuts at least 3" high. I found out this also helps...
I have two S10 & two 08s top handle saws I use regularly. The S10 was designed to be a "home owner's" version of the 08. The 08 power head was...
When the kids move out it changes one's perspective. Before, we all worked together getting firewood & split by hand. Then it was just me so I...
When mom complained about how steering her Cub-Cadet was really bothering her shoulders, she was 78 yo at the time, I took my Gravely 60" HD ZTR...
The area of our property is so irregularly shaped & has so many trees, stripping is not a practical option. However, it can look nice! I'm...
I put around 100 hours a year on mine.
I got almost 500 hour on mine before the idler bearing went.s
Since most of the wood I cut is clean, full chisel is what most of my saws run. I do have one with a 17" hard nose bar & semi-chisel chain for...
I also cut limb wood down to 2 to 1.5" depending on time. Only potential negative is the extra bark = ash. To me it is not a concern. However,...
Thomas, - I would encourage you to see how much more it would be to upgrade the axles to 10,000 (10K) axles. - D-rings welded in the bed....
Any chance of the warranty covering the hydraulic fluid lost? That could cost as much or more than the filter mount.
If you noodle the elm rounds into 5-6" slabs, the slabs will split fairly easy with a lot less strings. I took down a 43" elm & make the slabs so...
Nice collection Guido! Very creative MasterMech! What did you use for the chain crank?