By the way, you can keep the new clutch bearing greased without dismantling the clutch. Just take a grease injector for the guide bar nose and...
My riding buddy had a ported and piped 750 with a Dunstall fairing and seat. Watching this video brought back lots of grins from riding that...
I put a dab of grease on the end of the pulse line and pull it over a few times. The grease will tell the story if there’s a pulse on the line....
I've been adding and getting some old projects running and cutting. Here's a couple. Both from the Mid-60's and loud! [ATTACH] [ATTACH]
Surprised that no mention made yet of the best and simplest push mowers ever built. The LawnBoy mowers with the "brick top motors". I still...
CAD........By the time you realize you have it, it's too late!
Jonsered is the same saw as a Husqvarna, except the handlebar is straight for a felling sight, whereas the Husqvarna has an angled handlebar....
You can get a new OE piston and cylinder for it for less than $150. I would make it into a 346 while you're at it. About a 1/2 hp. more than the...
I have a 359 that Alan built for me. I like to take it to cutting parties and watch my friends expressions when they try it.
Yep, I have some Dolmars. I think they're a great value, especially when I'm cutting with a guy who has never heard of them, and is running one...
My vote is a 346 or at least a 353 Husqvarna.
This one sat on a shelf with some parts missing for decades. My buddy found it just before the retired shop owner was going to scrap the whole...
I've been running Saber since 1977 when we were introduced to it for use in snowmobiles. I have used it at various ratios, but now just mix 4...
My first tractor rides were on an Allis-Chalmers WC. First one I drove myself was a Case VAC, in 1961 or so.
Also check that small curved hose that connects the intake boot to the bracket. It is the impulse line "bridge" between the two. You mentioned...
I have a couple of FS-85s with handlebars and the saw blades on them for brush and small trees. They've been good, but now that I have a...
I'm thinking that the muffler might be loose or it's gasket blown out. A hole in the muffler in the wrong place from a bad muffler mod would...
I've used Saber since 1977. 100 - 1 all the way to 32 - 1 with great results. Currently at 32 - 1, since my snowblower has bushings instead of...
Resale doesn't make any difference on how a saw cuts wood. I'd add that guys who know the difference between plastic vs: magnesium based pro saws...
Do a muffler mod and add a 16" bar with a loop of Stihl PS chain to your CS-400, and buy a CS-590. You'll enjoy running these two saws, and have...
