Replied to the PM but will report back here. Floor is metal. When I took a MC reading from one of the splits on top it was over 25%. So it was...
Looked for it last night and nothing came up. Will try again tonight.
6 inches of 3/4" done in 2" lifts then compacted. Maybe go 8" with the last 2" done with 1/2".
Thought about it. If it got below 60* indoors then I would fire up the stove. Late June though.
We are enjoying the heritage much better than the clydesdale it replaced. I do not own the sea can. We have it at work and I wanted to give it a...
Ultimately I would like to be able to dry my wood in one season. Do not have the room for the 3 year plan. If I can get the stuff stacked in the...
Am I better off doing the hillbilly way. I do have 5 pallets currently.
Thanks for the replies. I thought that all I needed was weep holes for the water to drain out. There was discussion earlier about venting and the...
Went and checked on the wood in the sea can. Lots of moisture on the ceiling so I know moisture is being drawn out. But my concern is the mold....
Thanks for the replies. After I posted I had a light bulb moment and used the fork truck to lift the pallet so I could put holes in the bottom....
So I have wrapped a couple of pallets so far. I forgot to put in the weep holes on the bottom of one of them, will this be a problem? I see that...
If the same thing happens again next winter I'm calling it the new normal. Fingers crossed I am wrong. Florida is not far enough South anymore!
Forgot about the tongs. Thing I will have to find some. Nice to use those instead of the glove when I need to adjust a split.
Interested in giving this a go. Think a pole in the center of the pallet higher than wood (tent) to shed water is a good idea or should it be at...
From the manual: Burn Rate HIGH BURN: Fully load the firebox with wood on a bed of hot coals or on an actively flaming fire and fully open the...
Heating around 2000 sq/ft. Just had the Heritage installed 2/25/2015 and did the break in fires. Going to give it a go this weekend. Getting short...
Definitely need to get get it off the floor. Will get it stacked better once the snow melts. Although that could be August the way things are...
Weep holes sound much easier. Will get some pics when things get going. Thanks everyone for the info. Cannot wait to see what the MC is in...
Agreed. Will still keep my eye on the progression. If the heritage does not work out I will be looking for another stove.
Ok, I might be able to do the whirlybird. We do store aluminum extrusions on the top so I need to check on that. I could put a fan it the door and...
