Yea I had a big write up on AS about it. Finally one of his customers told him about it, and he contacted me.....since he wouldn't return my...
That's all good if you got the right sized wood for that, and it's not knotty. I hardly use my 6 way, due to my rounds being 24"+ diameter...
Stay away from All Wood! He'll tell you what you want to hear and ignore you if you have problems. There are some serious design flaws in his...
Also I'd check the recommendations on the pump. Some don't like thicker oil. My 28GPM is rated for AW32. I run AW32 year around, and that's...
Thanks all!
I installed a 1000W heater on my oil tank and plug it in an hour or 2 before I want to use it. It will get the oil 60-70 degrees. I haven't...
Wonder if that's a special ground chain that grabs the ice better. o_O
Get you a cbn wheel! Super Abrasive CBN 5-3/4” Chainsaw Wheels for 3/8, & .404 pitch Steel Chains | eBay No more messing with dressing and...
If the tank isn't baffled, then the design really doesn't matter, as it won't be very efficient in getting rid of heat. I had one that was...
I run a 28 gpm pump with a Honda GX630, but my pressure relief is set at 2200-2300, and it doesn't even grunt that GX630. The pressure is set...
Just wait till your average is that high, and you have to bowl out your azz just to get average. When you have an off night, it's way...
Time to get a finger tip ball and one with a weight block in it, if you want to start throwing with a hook. Also get some good ball cleaner as it...
I had that same one and sold it a few years ago for $800. I advertised it at that, and it wasn't up but a few days and someone snagged it right...
Ours has a start winding in it, and it shakes the floor and makes weird noises on start up. It's that noise that says man that's a lot of current...
We have 3x 600hp motors upstairs on our compressors for work. :) They make the ground shake when they start up, pulling 1600A of current.
I'm ready for some college football!! Although that means cold weather isn't that far away, it does mean I get to cut and split a load, then go...
No back problems here and don't noodle either......unless the round won't roll well, then I will. It's pretty quick, about 7.5 second cycle time....
I did the same thing last year and glad I did. $100 for a wheel that you never have to touch again. I won't go back to a stone wheel again. I...
I guess I stand corrected. All the stuff on ESPN is wrong. The story on the NFL channel about the whole thing, is wrong as well. I bet physics...
Yup, cause I can't find those letters on my calculator anywhere! Once a cheater, always a cheater!
