I mix wet wood in all of the time with dry wood in my Heatmaster and I haven't see any noticeable issues. If I do mix it in, it's always at the...
Forget to answer your question about wood size. What I’ve heard a few dealers on Facebook say is if you can grab it with one hand then it’s a...
My stove gets creosote built up in the back corners also. I notice it more when the stove isn’t running as hard vs when it is. Usually take my...
Congratulations on the purchase. What do you think so far ? Did you get new lines or did you gave good lines in the ground already ?
As I understand it, those splitters were made by YTinternational for DHT. I hope it’s true because I have a 28 ton DHT myself. YTInternational is...
Thanks for the information. I'll let the poker do the poking, and use the tool that came with the stove to do my scraping with. I'm sure buying a...
I'm using a home made poker to move my coals are around clean as much creosote as I can off of my firebox. The same tool came with OWB, I'll give...
lukem thanks for the information, very informative. Will definitely try your method next time I load. I've tried to rake the coals away from the...
Little bit of an update. Been burning off and on since mid-November, mostly on. If I have over a two day stretch in the 50's during the day I'll...
My 170, and 290 don’t leak a drop of oil or gas. Both of those saws are older than the 210 too. Maybe I’ve just had good luck over the years with...
I used Holland Dell trick and cleaned the oil tank out a few times with gasoline. I noticed every time I’d go to open the cap a little bit of gas...
I don't think it's the cap. If I flip the saw so the caps are facing straight up, there's still a pool of oil under the saw after I let it sit....
As far as I know the saw hasn't been dropped from any significant distance that would cause the case to prematurely crack. My SXS is only a year...
I've had a MS210 for the last ten or so years, I use the saw mostly for limbing, cutting grapevines and honeysuckle. A few years ago I noticed...
I believe it, my local dealer told me the same thing when I was looking at a Mule Pro-FX a few years ago. I do find it interesting that Kawasaki...
A four door machine starts out at 42k. I built one real fast for grins, nothing fancy ( windshield, winch, stereo ) and I was at 48k. If I spent...
My buddy priced one out, and it was 52k. If I hit the lotto, no problem. With my current income I'll stick with a 19K KRX. Around here there isn't...
We go down to Marshall / Tatum TX every year in March ( before the snakes and gators come out ) to go hog hunting. I agree, they can tear up a lot...
Mine is a 1000XP, I read about the chain issues before I bought the machine and they said they were fixed in 2021 for the XP lineup. Please see...
It's a 2021 model, so it should have the newer pinion reverse gear transmission. Yep, I've read about folks blowing out turf mode when riding the...
