I mean I really don't think so? Some states and cities currently have the ban. They banned 100w and 60w lightbulbs...they banned toilets that...
It's going to create a black market for used stoves like whan they first made the federal flight regulations on toilets in the 90s , I remember...
I have tried the top cover game. I lost too much wood to rot. What leaked through the top cover and the side where it repeatedly got wet. I won't...
Actually no. It's sitting by the wood stove. We both got sidetracked and it's still sitting there. I will see what we can come up with this week....
My guess and thought is that putting tarps out like you show will have zero effect on drying time or the amout your wood drys in any given time vs...
It's been a few years but so I don't remember all my wood technology stuff. But I don't think that's exactly correct. Moisture content is based on...
Yea there really for like demolition work or rescue stuff. As firefighters we may have to vent a roof to pull smoke away from a point. You have to...
I stack it all as I get it. If your far enough out it doesn't matter if you stack pine, oak, maple and poplar all together it will all be dry by...
So are you getting paid for this? Or is this helping a friend out and you get firewood in the process? Seems like A TON of work for firewood? Or...
The "dividers" or tyloses (spelling possibly wrong but that's your geek Forester term) is the reason that it's chosen to make barrels for liquid...
If it was already dried wood it will be fine as soon as it looks dry. If you have sun and a fit of breeze it will be dry in a day or so. But if it...
I was thinking the same thing. Then I was like no Jeff wouldn't be eying sweet gum must be hickory, nope bark doesn't look right and then I wanted...
Had a guy tell me there is some good trees where I was cutting when I said I got all I wanted cause the oak was too big. He said what about those...
So are you cutting it up and loading it for him? Or is this a paid job? Or is this stuff your doing for getting firewood?
If I remember right don't you have a video of this on YouTube? Basically a saw tuning video. Like he says the sound is kind of hard to describe...
When you rev the saw up (properly tuned one) it will be a clean rev sound and once it tops out in rpm it shouldn't sound clean or like it's...
No. It makes me think that because if the L needle is too far out. If it starts fine will idle a little bit and even off idle be fine but if you...
I will also say there is a possibility that you might have to adjust the idle but I don't think you will. It will slightly pick up RPM on e your L...
It's flooding, lean the L screw out. But still has a crisp acceleration when you snap the throttle. Too much it will bog and slow to rev. You want...
As much work as firewood already is why would you recut your spits back down to a uniform 16" exact? Is that little bit of trim so that the wood...
