Something like this perhaps? [ATTACH]
Here's the link to the kit if you're interested. No affiliation. They make one without the spring for the 462 as well. Buy The Ultimate Faller's...
I'm real lucky I get to pick and choose what I get now. There's so much wood around here that is literally just wasted and thrown in the dump it's...
Anyone else find the 500i suspension to be too loosey goosey?
I ordered the suspension kit from West Coast Saws. I'll do a before and after video comparison and post.
I got the needle bearing, clutch clips, worm gear spring, and clutch drum washer installed today. The black plastic chain brake mechanism cover...
I just use black hockey tape. It's not sticky on the outside - just on the inside. I've had to replace the grip once so far in 3 years. I've...
Yeah don't forget it makes a mess!!! Just taking it out of the truck and stacking it I had to sweep up a ton of bark. I scored a tiny bit of river...
My neighbor across the footpath from me got his two trunked river birch cut down today. My tree service buddy gave him a great deal. He took care...
Yep I saw Taryl wrap the shaft with masking tape and lubricate the seal and just ease it on in there. I don't have the seal driver but I'll use...
I did inspect for oil leaks both before and after draining and filling. Since it was so low before the entire trannywas covered in oil so it was...
buZZsaw BRAD ain't the only one! I've had my manual pole saw replaced as well as an x27. I also, coincidentally, had a brass slop sink faucet...
And you can watch the video of replacing the seals with a timestamp here. [MEDIA]
Yeah I did order a two axle seals and the fill plug. According to the parts diagram and the videos I watched, it is only the external seal part...
Here's the only other pic I have of the oil. Also dealing with the crappy hood plastic. Serious design flaw....or perhaps they designed it to fail...
I also love the small Fiskars hatchet. Initially I didn't like it so much for making kindling. It was a bit lighter than the wooden handled one I...
Thanks! Yeah well some people with $$$ just don't care. It's sad. They can just go and buy another one. It didn't move at all because there...
Yeah I should have been more diligent and checked the mower deck but I initially thought it would be a terrible hassle to remove the deck....but...
Check if you have a low oil sensor. Sometimes they go and you can just short the wire and bypass it if you are the type of person to be on top of...
Ok I got good news.......no check that GREAT news......and a little bit of bad news. The great news is.....I pulled the tranny, put the frame on...
