Oh my.
Yes, I am not so sure about that either. The Madison is above the door and with the knob in place, the door hits the knob. My solution was to...
The Madison does put out some heat; I will say that.
I wanted the 30-NC; was ready to purchase it but had issues finding what I needed to have the required R value for the floor. I am wondering now...
Yes, I noticed that. What do you think prompted that move? Some new regulation?
If you remove the clean out at the bottom, you can shine a torch up into the chimney for inspection; try taking a photo and posting it. You can...
Oh, I wouldn't use the appliance until the chimney was replaced. I wouldn't try to just repair sections; for one, it is built on a bottom up...
Not all manufactures of Class A chimney have an outset offset; I know because my brand didn't have an outside offset as stated in the literature....
I love watching how the "flames" dance above the wood. [MEDIA]
No, but it is nice to have music while you work :D
In the photo you will see a circular opening. There are two of them. The one visible is for the PTO; the level to engage and disengage the PTO...
On the 8N, the trumpet is the part that the axle shaft goes through. If you look, it spreads out where it is attached to the centre housing and I...
Here is the photo of the chimney I promised. It probably is a bit short but I can't add on to it without using some sort of lift. I had to get...
On my stove the ash pan is a good size and works well. I use to shovel out into a bucket but got a lot of ash floating in the air. I also had to...
Putting the Old Girl back together. Can't continue to sit on this; I need a machine if I am going to work these hillsides for wood. The...
Oh, well, England Stove Works seemed to be quite proud of that technology.
I just thought people would be interesting in seeing the new design of the stove.
My chimney may be too short. I am also through the wall and I have been told that takes a foot off the chimney. I may have to rent some sort of...
Yes, I do crack the door and try to make sure things are hot. I use the clean out plug, it does eliminate a lot of the ash but I still see it...
If you would leave me alone I probably wouldn't abandoned posts. You usually come in and start making comments that don't need to be made. Like...
