To add to that story .... I ordered a set of full wrap 9 layered SwedenPro’s in 32-34 . Made pretty spiffy looking peddle pusher PPE . Luckily ,...
TribeFan440 . If you order chaps ( not chain saw pants ) be aware that the length of the chaps are measured from the beltLine , not the inseam .
Hey folks , Any of you looking for a decent used cylinder for a Shindiawa 488 ? I recently did aP&C on one . For practice ,I decided to clean up...
Well , that 361/AM carb just left here with a happy owner . But the reason I use OEM kits , even on AM clones is that I feel the diaphragms ,are...
I‘Ve had reasonably good luck with AM carbs . But ,I always use OEM kits when I rebuild a carb for some reason . In fact , I just got An AM...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Got these two in for some work . The 361 was running fast at idle . The 041 wouldn’t run ,except for...
Congratulations ! That’s a really nice saw that you will get many hours of useful enjoyment from . A word of caution ; If at some point you find...
I’d pass as well given your description of the saw .
You’re pretty much spot on . However , I have seen one instance of coil causing a no restart issue when hot , but ran fine before shutting down ....
I’ve read 80% probably more than any other percentage . But , I don’t think it’s all that critical . My MS 460 is opened up more than the[ATTACH]...
Yes , the screen is kept in with those tabs .
Here you are . The paper[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] is 3” wide , marked at 1/2, and 1” for scale .
Next time I’m down in the shop , I’ll pop mine off for some pics . Most likely tomorrow A.M. .
Yep . In the first portion he was saying c clamps . I kept wondering what he was planning to do with them . :doh:
Yep , for the C clamps ... took me a bit to catch on to what he was referring to .
Thanks ! I actually have the work shop manual for the L3130 . Just wanting to get some info from those with experience in such things . Also :...
Any chance that you could do a series of pics as you repair this ? I’ve got an 03 3130 . It has a small leak in the seal where the axle pivots to...
Found this site that stocks Tsumura bars ,and other items . stihl, husqvarna, jonsered, chainsaw, chain saw, parts, aftermarket
I don’t get why the use that tiny , thin line for the fuel feed ,and larger, thicker walled line for the purge lines . It either breaks at the...
If you are looking a Tsumura , also look for Total super bars . They are Tsumuras . A bit less $$ when you find them .
