You have the right attitude too Snowy. I have a clotting disorder called Factor Five Leiden. It causes my blood to clot spontaneously. I had a...
I was a master mechanic for Oldsmobile then a firefighter/mechanic until 1984. I took a job with a large manufacturing company running their...
I was cruising along, enjoying life too then I had some health issues that resulted in a diagnosis of MS at 61. I could have just accepted it and...
And you are lucky that you have the knowledge and ability to make a new board to your liking. Kudo's!
I'll let you know tomorrow morning. So far it has been running for over 8 hours. Yay!
Me either Snowy. I used the process of elimination by checking and ruling out the ESP and all other connections. That data was backed up by the...
Well, the board came in. I set the dip switch and installed it. The stove fired up in its usual time...about 6 or 7 minutes...and ran until the...
Don, you have backups to the backups!
That is an old school tank indeed!
I'm sure getting a schematic would be next to impossible. I talked to one of the engineers at work and they said they would like to "play" around...
Yeah, I looked as closely as I could but didn't see anything. I did notice something that could prove it's a bad solder joint or a connection...
I am right on the ocean so any sea breeze at all in the winter keeps me warm (er). No complaints here!
4 tons could last me three to four years! With cold winters, maybe 2 1/2. :thumbs:
My house is only 1100 square feet so one stove is enough to blow us out. My typical pellet usage for the year is only 3000 pounds. Some years it's...
Ok, board and ESP on their way. No big deal as I am running on Stove Temp. Delivery is supposed to be on Monday.
I've spent a good amount of my career working with low and high(er) voltage circuit boards so I know from whence you speak. I just pulled the...
Well, the blink is back. The first thing I did was remove the ESP and measure the resistance. At 70 degrees it was 1000 ohms. Running it under...
Bob, I can't disagree with you. I'm pretty confident that this is strictly a board issue. To that end, I removed it from the stove and checked it...
Positive. Interesting thing is I turned the feed adjustment down to 3 and since I wrote last night it's been fine. No blink. I've got to scratch...
Update on my 5 blink. I pulled the stove apart. Removed all baffles, combustion fan cover, ignitor cover, fines box cover, exhaust...
