3-20-05888 is the full number Try this Harmon Furnace Control Board 3-20-03100 / 3-20-05376 / 3-20-05888 / 1-00-05888 | eBay I have dealt...
YESSSSS...BIG PITA. They make the fire look really cool, but such a pain to clean around. We use nut shells in our stoves and the ash is...
Sounds like it's time for a fresh board. There are far more components than the Triacs that are involved. You can replace the board with the...
No worries That's what we are here for..... We had a traditions, which uses the same control. Great stove.
Yes indeed. Just real happy to have the material to burn. Last night the temps dipped down a fair bit (Lower 30's F ) and we ran only the little...
The chart I dug up from Harmon did not mention any differences in the -05376 board due to revisions...the revision box had a line through it. The...
Made an interesting discovery. We have been burning the nut shells for 27 years and always had to deal with a clinker issue. Every 6 hours or so...
Fire starter GOOP = Jellied alcohol Hand sanitizer works 2-3 squirts across the pellets in the tray and light it Make sure you have alcohol...
We had one. Great stove. As far as operation goes... Pretty simple. Make sure the fire tray is clear...add pellets and some lighter goop. Light...
Your board is the 3-20-05376 Chart shows all dips off BLACK ESP ONLY WITH THIS BOARD The 05376 and the 05888 boards seem to be interchangeable...
Here are the settings for the dips for the PF100 Control board # 3-20-05376 All Switches off BLACK ESP...
What color is the one that's in the unit ???? Get the same color as what's in there. As LW said....you must change the dips if you swap colors....
I was on the Amlodapine for a while.. Stuff kicked my AZZ. Just could not tolerate the stuff. After 2 years of complete misery I tossed all the...
The puller tool FYI The hole in the side of the tool goes all the way through, with the one side tapped to accept a 1/4 20 allen head hard...
A little puller is nearly a must to get the impellers off without thrashing things. Made this little GIZMO to remove the impeller. As mentioned,...
Happy Birthday smwilliamson :cheers: X ??? And many more
Ramps the blower speed down a bit so it don't sound like a 747 leaving town
Over the years here at the ranch we have had many encounters with SKUNKS The old stand by TOMATO JUICE was always on hand. Tried the various...
Hmmmmm...Sounds like a Ford dude trying to talk with a GMC freak :rofl: :lol: I have seen igniters in the Quads go...some go phfffffft and melt....
If someone has messed with it there was likely an issue. The timer on the auger sounds like a work around to get things operating. Here is a...
