This is a bottom feeder ??? Convected heat back the lower auger ???? How about adding a heat isolating coupler between the motor and the auger...
Seems that these motors are leaving far too early in their life. Is there an issue with the bottom auger that is over stressing the motor ??? I...
Got the panel out of the plastic wrap and started chewing on it with tools. Made a relief cut on the back lower corner to allow the "Way...
This may sound overwhelming to some folks, but when its all laid out on paper it is real simple. Just takes some time to get all the circuits...
Not at all. Always happy to share ideas. Safeties are right up in the first tier. Power feeds from the power cord to the MAIN fuse then to the...
A lot of the crap is "clinker" that is comprised of all manner of non burnable junk. (read this as sand/silica and anything that melts but does...
Can't fault that one little bit. That sort of thing is the way it should be.
My projects tend to go in fits and starts. I did the design work back a few years and got the basics figured out for the P2 Then I actually built...
The big reason the factories have chosen to pimp the starter jells and other little starters is LIABILITY. They don't want to deal with all the...
That Diesel GMC in the piccy had been outfitted to haul a big AZZ fiver before I bought it used. Not sure whether the rear springs had been beefed...
I used to put 2 full pallet loads of pellets in this old beast Same rules applied
Having been in commercial trucking for years I learned early on that RULES can be broken, but ya gotta be real careful. No radical motion, keep...
Some die at 5-7 years
Sweeeeeeeet Cruising ebay this morning and stumbled across four SSAC AC phase/speed controllers at a very very good price. These four little...
OH YEAH BUDDY Them OLD OLD'S ARE TANKS Years ago my dad was at the depot and they had pellets on sale and he loaded a full pallet load in an...
Back in the early days we bought a 5 gallon can of fire starter jell from a local paint company. It was a blue goop (alcohol base) and worked ok....
Nice looking unit.
Yesssss, gotta keep the boss happy. My having a stove in nearly every available corner was pushing the limits of civility A LOT Buttttttt, the...
Just a chillin with the kitty cat. The other half had 3 teeth pulled this morning, and is curled up in the recliner watching TV quietly. I am...
Hey hey hey. Got a bug in my butt this afternoon and figured out the bracket for the new panel, then made a cardboard template. Tried that out...
