I bought a smaller unit that is PTO driven. It is hydraulically, roller fed which is super nice. I have been very pleased with it. I did quite a...
[img] With only close to 7 inches of springs on the rear I was afraid I was going to hurt it ;) I looked for one of these for 4 years till I...
For images you cut and paste from your site and put [ ] with img in the brackets at the front, then put the same brackets at the end with /img in...
Got lucky today and scored some free wood. Got it loaded and made it safely home without the cops pulling me over or it falling out of the bed....
If you've got good compression, get the coil and you'll have a good saw. Off ebay they are less than $30.00. I've done several now and they are...
[img] Decided I'd better make up a holder for the extension and jack handle so they wouldn't get misplaced. Decided on a design and used some...
I would think that would be strong enough on your foot at that rate. I would definetly heavy chamfer the edges on your foot to beam welds so you...
Just go with the 3/4 lines, long sweep 90's if you have to have them. That way if you do decide to upgrade it will be very easy to do. Try to do...
To redneckdan, is there an advantage to baffles to a dispersion tube. I was told to use a tube so that is what I made up. [img] Just wanting to...
James IS one of the nicest guys I have ever dealt with and glad you found the same thing out. Saved me a lot of headaches while doing mine and his...
[img] There's another set of holes for the keepers too. Just less of a falll if something goes haywire or you want to move it with it up. [img]...
[img] For the ram extension I'm going to try a simple, slip on affair. End will have a hole to attach like the jack has. Weight will keep it in...
[img] Side reach is kept at a minimum this way. If the wheels was sticking out I'd have to be a lot further away. You need the width for...
[img] [img] This is at a level 36 inches high. It will go down to 30 inches but that is a little low for me but I wanted the adjustment, just in...
[img] I got customs spinners on my ride now! :0 [img] Got it all painted and back together so here are some finished pics for you. [img]...
[img] Here's the press in zerk. I ream the hole to .245 [img] Then just press it in with the arbor press. Quick and easy. [img] Before...
[img] All cleaned up and started painting. I did one side of the main framework and some smaller pieces. dad came down to help as it takes a...
It's all painted and in the process of reassembling it. 10 hours, 7 days now so even less time to work on it but I'm doing what I can. Gun...
This one is a 600S 4x4 diesel. Yes, it is heavy. Right at 20000 lbs and as you say, they do leave their mark. But that is the best part of owning...
They are a great tool to have and use. Do they provide a safety harness to put on when you rent? We ended up deciding to get one after one of...
