IS probe hole

I did a quick search but came back empty. Does anyone have the size and thread pitch of the hole in the ideal steel? My probe got roasted and bent, and my cat guard cover thing is melted to death and pushed the probe out when I slide the cat closed any way

Any help is much appreciated.
Tony

 

Sorry I can't help with the hole size and pitch, but just wanted to drop in and say that if you call Woodstock I bet they'll send you a replacement screw for little or no charge saving a trip to the hardware.

 

This is probably true, but it's prime season and I'd hate to be a distraction

 

I tried to find the screw that came with our stove but no luck. I also looked in the parts section of the manual and didn’t find anything. I’d call them. Most of them will know the answer without looking it up.


Sent from my iPhone using Tapatalk

 

Just stick a magnet over it.

 

best answer.


ill check my screw and see if i can get a size, chance04

 

Memory is thinking 5/32.. Mines still in but its still hot..

 

sure looks like 1/4 -20 x 1/2 to me

 

That sounds right TurboDiesel !!!

 

Didn't I read somewhere that at extreme temps magnets loose polarity? At 900F I would assume it would have an effect on the magnets strength? Am I wrong?

 

I've currently got a husqvarna carb bolt from the bolt bin finger tight in that hole. But tomorrow I'm gonna be digging in the parts bin at work