I already know the d009 is large mount husky- jonsered, but do any our resident experts know if these will work with the pioneers or older dolmars?
It works on some new Dolmars. 64xx-79xx series. A little loose on larger Echos, but works. Which older Dolmars are you thinking?
Mostly thinking of pioneer p45 or poulan pro 455 because I have one. I believe the d009 will work on this saw with a modified stud on the chain tensioner. Needs to be round not square.. I dontd have any old dolmars but I do like them and would love to find a 120 super or a 143 in running condition.
This should help. Find the saw you're curious about and scroll down. The bar mount pattern for most saws is listed. There is also a bar pattern section to compare one to another to check compatibility with redneck engineering Chain Saw Collectors Corner Home
I had a f55 farmer ( partner 55)with that bar mount, it was a good old saw. I now have a 16" bar that I had for it modified to fit my 261 stihl, just widened the stud slot to 12.1 mm I believe, and run a 58 link 3/8 chain.
I know it’ll work with Dolmar 6400- 7910 . Not sure of the olderdolmars . Go to bailey’s ,and use their bar selector guide . It’ll tell you what you need to know .
I don't get along well with baileys website. I think it is intended for PC not smartphone. Good to know that the D009 works on newer dolmars.
Yeah , they “ improved “ the site . Makes it harder to use . . . You can also try www.oregonproducts .com . Type in the make and model of the saw you have ,and it will give you your options for bars . It looks like quite a few earlier Dolmars used the k095 type mount .
