hows you thread

Lmao Cole what saws are they

 

084, 394, 066, 066, 372, 361

 

I talked to Randy last week when he was finishing your 460 Steve, said he dnt do many of that model

 

Husky and stihl, Dall could take notes there Cole.lmao

 

You have a lathe to check cylinder out ?

 

He figured out a lot more than I would have thought. Used to be that saw would die in the cut if you even thought about using the dogs.

 

Ya. I have the mandrel made for the 066. Will try to do that tomorrow.

 

Were they JMS'd?

 

Ya. All run well currently so I am hoping it's just a PM. Check bases. Porting. Case cleanliness. Needle bearings etc.

 

Dnt feel bad Cole I have a few of his myself, pd 25.00 for the 1 cylinder from a guy to scared to run it.lol

 

Hopefully they are all ok or don't need much.

 

I checked two for a fella one sanded and one turned, the sanded one was the closest, so check everything...
Here's the turned cylinder by JMS.

 

I need to email them i forgot.

 

Increasing my knowledge of saws along the way. So that's a plus I guess.

 

K. Thx for the heads up.

 

That cylinder was way out.

 

I dnt have any lathe, so I just pulled the mufflers on mine and checked for the famous smear, nothing yet.

 

What color orange do you use Dustin? I need to paint a side cover for my 288

 

For over 10 years my cousin has been running a 455.
It was toasted he rebuilt it and has cut more than some pro guy's i know.
His and his father in laws house's
Plus garages and neighbors he cuts for.
He hasn't rebuilt it since
Tough saw's.

 

84 and 92 would be great.