In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Built a shooting bench

Discussion in 'The Game Room' started by foragefarmer, Feb 18, 2014.

  1. foragefarmer

    foragefarmer

    Joined:
    Oct 3, 2013
    Messages:
    1,479
    Likes Received:
    4,567
    Location:
    Central, Virginia
    Well I can't work right now because the snow we had is melting and it is a quagmire.

    So I fired up the stove in the wood shop and built a new shooting bench.
    I used these plans as my guide.

    [​IMG]

    I used materials I had on hand. 4x6x8 fence posts and Oak and pressure treated poplar fence boards.

    [​IMG]

    [​IMG]

    [​IMG]

    It is meant to be buried in the ground 9 inches.

    I read where someone built this bench and wished they had extended the left hand shooters side so two people could shoot so I did that.
     
  2. Joe

    Joe

    Joined:
    Dec 19, 2013
    Messages:
    207
    Likes Received:
    851
    Location:
    Mesick, MI
    Those are the same plans I used for my bench. I did deviate a bit here and there, but it's a very stable bench.

    [​IMG]

    I love shooting on my own land. I have a max range of 300 Meters but it serves me well. I reload and it's nice to work up a new load and just step outside to check it. I don't miss going to a rifle range to do that.
     
  3. papadave

    papadave

    Joined:
    Oct 3, 2013
    Messages:
    18,181
    Likes Received:
    82,470
    Location:
    Right where I want to be.
    Nice jointer.
     
    imacman and foragefarmer like this.
  4. Smokinpiney

    Smokinpiney

    Joined:
    Oct 4, 2013
    Messages:
    3,811
    Likes Received:
    20,675
    Location:
    "South" Jersey
    Both great lookin benches guys! Yet another one on my project list.
     
    foragefarmer likes this.
  5. papadave

    papadave

    Joined:
    Oct 3, 2013
    Messages:
    18,181
    Likes Received:
    82,470
    Location:
    Right where I want to be.
    You know, I got so carried away looking at the jointer, I forgot......great bench.:confused::D
    Can we see some pics with someone using it now?:)
     
    foragefarmer likes this.
  6. foragefarmer

    foragefarmer

    Joined:
    Oct 3, 2013
    Messages:
    1,479
    Likes Received:
    4,567
    Location:
    Central, Virginia
    It seemed like the best option on the net for a permanent bench. I built mine from what I had on hand. Did you buy your materials in one go and if so how much did they cost?

    And did you set your legs in concrete?
     
    Last edited: Feb 19, 2014
  7. foragefarmer

    foragefarmer

    Joined:
    Oct 3, 2013
    Messages:
    1,479
    Likes Received:
    4,567
    Location:
    Central, Virginia
    You want to come down and help me load it in the truck? :p:whistle:

    I don't know when this will be put in position, my fields are awful. We still have some snow and it is raining right now. No work for me again today. I am changing oil in the trucks.

    The powermatic is nice. Those two pieces of wood on it are hard maple from a basketball court.
     
    Last edited: Feb 19, 2014
  8. stihl sawing

    stihl sawing

    Joined:
    Feb 4, 2014
    Messages:
    969
    Likes Received:
    3,532
    Location:
    Arkansas
    Really nice, should serve you well and a awesome place to shoot too.:thumbs:
     
  9. papadave

    papadave

    Joined:
    Oct 3, 2013
    Messages:
    18,181
    Likes Received:
    82,470
    Location:
    Right where I want to be.
    Just "strike a pose".:thumbs:
     
  10. Joe

    Joe

    Joined:
    Dec 19, 2013
    Messages:
    207
    Likes Received:
    851
    Location:
    Mesick, MI
    I didn't set mine in concrete. It's just buried a bit.

    Only thing I bought for mine was the top lumber, 3 or 4 boards of pressure treated deck board. Oh and a box of deck screws for the top, I didn't want rust on the top. Don't remember what I paid for those but it couldn't of been more than 25$.

    The rest of the materials I had on hand from a deck tear off and I just nailed it together with a nail gun.
     
  11. Certified106

    Certified106

    Joined:
    Oct 17, 2013
    Messages:
    4,172
    Likes Received:
    11,912
    Location:
    In The Hills
    Looks like a great bench!
     
  12. eatonpcat

    eatonpcat

    Joined:
    Oct 5, 2013
    Messages:
    10,275
    Likes Received:
    58,436
    Location:
    Eaton Township, OH
    Very nice!!
     
  13. foragefarmer

    foragefarmer

    Joined:
    Oct 3, 2013
    Messages:
    1,479
    Likes Received:
    4,567
    Location:
    Central, Virginia
    Got the bench set over the weekend. It is nice and solid in the ground without any concrete.

    [​IMG]

    We were shooting pistols when I walked back and actually got a pic of the bench.

    [​IMG]