Chainsaw Pics...

I really like that storage idea. Doesn't take up much room for all those saws. Great job

T2 Tappin'

 

Just installed new inner and outer spikes on the 562 this evening



T2 Tappin'

 

Been a little under the weather lately, so I ran into Walgreens to get some more Sudafed and stopped in this gloomy old Husky dealer to pick up a couple fuel lines, I had been in there once or twice, but just in and out to grab a part. He was with a customer, so I was looking around. He has this pole in there with new saws hanging on it, and I just so happen to walk around and see what was hanging on the back of it, and there it was..... He made me a deal on it because they are discontinued, what a nice fella...

 

I barely remember when mine looked like that.

 

Anyone ever run a Johnsroud?

 

Nope but I would have paid that to find out what they are all about.

 

That's what I did

 

Nice that's a heck of a buy.

 

We shall see

 

How many saws do you have hd? Boxed and unboxed

 

Thats a good week, 346xp NIB and the unicorn Johnshroud?!!

Is the big guy a runner too?

 

Always one or two less than I want... no clue honestly.

 

Supposedly ran 8 months ago, just sits now cause he can't start it, I know how spendy Jonsered 2094 parts can be, so I can only imagine how expensive Johnsroud parts can be, hopefully some of the parts will interchange if needed cause I have a Jonsered 2094 parts saw here, obviously at least the clutch cover decal is interchangeable between Johnsroud and Jonsered. I'm hoping at most a carb kit, fuel line, possibly a set of rings, and down the road.

 

Come on! Your not going to even throw out a number? I have have family in Kokomo I will have to have them come over and count them. What's your address?

 

I was talking to a friend of mine the other day as we were standing in my shop, he was just staring at the walls, floor, shelves... I asked him if he had heard of CAD, he said no, so I explained to him what it was. He asked if I felt like I had it, I told him I didn't know if I had it or not, but I guess some people that have 5-10 saws feel like they do. He said, well if that's the case I'm sure you're clinical cause you wouldn't know it if someone stole 10-20 saws from you. That really got me thinking that I may need to sell a few. So I bought some more, and that feeling went away, who knows, maybe I do have it?

 

"How many saws do you have, and what's you're address" well.....let's see. I have one, yep, that's all I have one, I don't even remember the model, I just know it's green and purple, and it doesn't run anymore..

 

Pro Mac 10-10s,3.5 cube/57cc lightweight powerhouse.Produced from 1982 to mid 80's sometime,this is one of the cleanest ones I've seen that wasn't New Old Stock & in original box with factory paperwork.Last of the ''10 Series'' saws that originally started in 1965 with the 3.3 cube/54cc 1-10 RH start model.
Screaming wee beast,has very low hours,original McCulloch branded 20" .050 gauge Windsor sprocket nose bar.Chain worn down quite a lot but very sharp.Went through this 4 year old super hard 16" Green Ash like it was nothing,look at those shavings! Nice straight smooth ripping cut.