In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Honda Generator oil

Discussion in 'Chainsaws and Power Equipment' started by Gary_602z, Oct 13, 2013.

  1. Gary_602z

    Gary_602z

    Joined:
    Oct 4, 2013
    Messages:
    2,464
    Likes Received:
    12,340
    Location:
    Lake Odessa, Michigan
    Have 5000 watt Honda generator about 30 years old. What should I use for oil? I think it calls for 30 weight non-detergent. I was thinking reg 10-30 or Mobil 1. This is setup to run and shut off Automatically on power loss/restore. This might be the 2nd oil change in it's life!:)

    Gary
     
  2. MasterMech

    MasterMech The Mechanical Moderator

    Joined:
    Oct 2, 2013
    Messages:
    9,648
    Likes Received:
    26,044
    Location:
    Greenville County SC
    10w-30 will do . 30wt is still available but in limited varieties and I've not seen a synthetic 30wt widely available. I recommend synthetic over Dino in just about every case, if this unit will be called upon to start automatically in freezing temps, then 10w30 synthetic is a great choice.
     
    Gary_602z likes this.
  3. Gary_602z

    Gary_602z

    Joined:
    Oct 4, 2013
    Messages:
    2,464
    Likes Received:
    12,340
    Location:
    Lake Odessa, Michigan
    Thanks MM.
    Gary
     
    MasterMech likes this.
  4. rottiman

    rottiman

    Joined:
    Oct 4, 2013
    Messages:
    14,437
    Likes Received:
    95,936
    Location:
    XXXXXXXXXXX
    Get alittle seafoam engine treatment and run some in the crankcase just before you change the oil. Seafoam cleans up any sludge laying in the bottom of the motor. If you put some in the fuel, it cleans up the carb as well. Great stuff.
     
    blujacket likes this.
  5. blujacket

    blujacket

    Joined:
    Oct 4, 2013
    Messages:
    543
    Likes Received:
    1,910
    Location:
    Kettering, OH
    I 2nd this. Great stuff that SeaFoam is.
     
  6. Pyroholic

    Pyroholic

    Joined:
    Oct 4, 2013
    Messages:
    880
    Likes Received:
    3,039
    Location:
    mid michigan
    You guys are the only ones I've heard talk highly of seafoam. Likely that the folks I talked to were trying to fix a hole in a piston or some other thing. It seems some people think you can repair catastrophic damage with a bottle of goo.
     
  7. rottiman

    rottiman

    Joined:
    Oct 4, 2013
    Messages:
    14,437
    Likes Received:
    95,936
    Location:
    XXXXXXXXXXX
    Its not a goo, not a miracle worker. All it is ,is a cleaner and clean it does.
     
    blujacket likes this.
  8. Pyroholic

    Pyroholic

    Joined:
    Oct 4, 2013
    Messages:
    880
    Likes Received:
    3,039
    Location:
    mid michigan
    I'll give it a try if it ever comes up, which I'm sure it will. I trust you yahoos on this subject more than my real life yahoos.
     
    fox9988 likes this.