In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

How hot can you get your stove?

Discussion in 'Pellet Stoves, Pellet Fireplaces, Pellet Furnaces' started by IHATEPROPANE, Feb 9, 2014.

Page 1 of 2
  1. IHATEPROPANE

    IHATEPROPANE

    Joined:
    Oct 13, 2013
    Messages:
    4,671
    Likes Received:
    19,077
    After reading a post in another thread I thought it would be interesting to see how hot we could get our air temps.

    For comparison, and to be as consistent as possible I was thinking we state the cfm of the blower, lbs/hr on high, let it run on high for 1 hour before taking readings, and taking a left, middle, and center reading by either thermocouple or IR. And maybe pellet type. Any other suggestions? I will try to get my results within couple of days.
     
    IHATEPROPANE, Feb 9, 2014
    #1 Top
  2. jdonna

    jdonna

    Joined:
    Jan 20, 2014
    Messages:
    368
    Likes Received:
    505
    Location:
    MN
    Spear Fish South Dakota Pellets.

    Feed 4 out of 5 4 lbs an hour.

    IR left 430 center 610 Right 450.

    No idea on CFM, comparable to the rest I guess.
     
    jdonna, Feb 9, 2014
    #2 Top
    IHATEPROPANE and slvrblkk like this.
  3. 343amc

    343amc

    Joined:
    Oct 3, 2013
    Messages:
    1,749
    Likes Received:
    5,765
    Location:
    Northeast Lower Michigan
    No fancy temperature measuring equipment here. All I know is mine runs hot enough to keep the house warm on a cold azz day.

    That being said, I'll be interested to see what the various results are.
     
    343amc, Feb 9, 2014
    #3 Top
    will711, gbreda, brokenwing and 2 others like this.
  4. eatonpcat

    eatonpcat

    Joined:
    Oct 5, 2013
    Messages:
    9,688
    Likes Received:
    54,051
    Location:
    Eaton Township, OH
    More importantly...How hot can you get your wife??
     
    eatonpcat, Feb 9, 2014
    #4 Top
    will711, gbreda, imacman and 6 others like this.
  5. IHATEPROPANE

    IHATEPROPANE

    Joined:
    Oct 13, 2013
    Messages:
    4,671
    Likes Received:
    19,077
    Nowadays, just above freezing.......
     
    IHATEPROPANE, Feb 9, 2014
    #5 Top
    gbreda, imacman, slvrblkk and 2 others like this.
  6. IHATEPROPANE

    IHATEPROPANE

    Joined:
    Oct 13, 2013
    Messages:
    4,671
    Likes Received:
    19,077
    Excellent, this is good stuff
     
    IHATEPROPANE, Feb 9, 2014
    #6 Top
  7. mepellet

    mepellet

    Joined:
    Oct 4, 2013
    Messages:
    124
    Likes Received:
    75
    Ir is going to give you surface temperature.
     
    mepellet, Feb 9, 2014
    #7 Top
    gbreda, DexterDay and subsailor like this.
  8. subsailor

    subsailor

    Joined:
    Oct 17, 2013
    Messages:
    3,693
    Likes Received:
    14,973
    Location:
    Winthrop, Maine
    Yup, no way the air temp is 630.
     
    subsailor, Feb 9, 2014
    #8 Top
  9. IHATEPROPANE

    IHATEPROPANE

    Joined:
    Oct 13, 2013
    Messages:
    4,671
    Likes Received:
    19,077

    Yes, IR will only give surface temps...but it is for comparison to others that measure with IR so its still good info.
     
    IHATEPROPANE, Feb 9, 2014
    #9 Top
  10. IHATEPROPANE

    IHATEPROPANE

    Joined:
    Oct 13, 2013
    Messages:
    4,671
    Likes Received:
    19,077
    JTakeman says he gets 600 degree air
     
    IHATEPROPANE, Feb 9, 2014
    #10 Top
  11. smoke show

    smoke show

    Joined:
    Oct 4, 2013
    Messages:
    2,983
    Likes Received:
    13,948
    Location:
    Pittsfield, Wi
    yes, JT has a lot of hot air.
     
    smoke show, Feb 9, 2014
    #11 Top
    gbreda, jtakeman, imacman and 5 others like this.
  12. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,632
    Location:
    Northeast Oh
    Will have my results tomorrow. Cleaned my Enerzone tonight to have some good exchange heat., ;)
     
    DexterDay, Feb 9, 2014
    #12 Top
    will711 likes this.
  13. pell it

    pell it

    Joined:
    Jan 18, 2014
    Messages:
    124
    Likes Received:
    392
    Location:
    Rhode Island
    US 5660 cleaned yesterday.
    Cranked on high for an hour this morning burning a Vermont/AWF mix.

    Center - 290 f
    Ends - 275 f

    Measured with this:
    image.jpg
     
    pell it, Feb 10, 2014
    #13 Top
    IHATEPROPANE likes this.
  14. imacman

    imacman

    Joined:
    Oct 23, 2013
    Messages:
    6,599
    Likes Received:
    27,373
    Location:
    Denver, NC
    Ditto on both points
     
    imacman, Feb 10, 2014
    #14 Top
  15. woodsman23

    woodsman23

    Joined:
    Oct 26, 2013
    Messages:
    82
    Likes Received:
    114
    Location:
    southwestern nys
    585 IR
     
    woodsman23, Feb 10, 2014
    #15 Top
  16. jtakeman

    jtakeman Moderator

    Joined:
    Oct 4, 2013
    Messages:
    12,194
    Likes Received:
    54,972
    Location:
    NW CT foothills
    Ha ha! Your just lucky its not coming out the other end!

    :p
     
    jtakeman, Feb 10, 2014
    #16 Top
    brokenwing, slvrblkk and gbreda like this.
  17. IHATEPROPANE

    IHATEPROPANE

    Joined:
    Oct 13, 2013
    Messages:
    4,671
    Likes Received:
    19,077
    Sooooo.....I didn't have batteries for my IR so I only used the thermocouple. I only had it ob high for 30 min because I started to see some black smoke coming from my vent.....and got a bit nervous :) In hind site I probably should have opened my damper, it almost closed for normal operation.

    Results:

    Left-377
    Center-371
    Right-353


    Attached is a pic of the wood burner magnet at a little over 350
     

    Attached Files:

    IHATEPROPANE, Feb 10, 2014
    #17 Top
  18. jtakeman

    jtakeman Moderator

    Joined:
    Oct 4, 2013
    Messages:
    12,194
    Likes Received:
    54,972
    Location:
    NW CT foothills
    green dude.jpg
     
    jtakeman, Feb 10, 2014
    #18 Top
    gbreda, DexterDay and will711 like this.
  19. pell it

    pell it

    Joined:
    Jan 18, 2014
    Messages:
    124
    Likes Received:
    392
    Location:
    Rhode Island
    :rofl: :lol::thumbs:
     
    pell it, Feb 10, 2014
    #19 Top
  20. slvrblkk

    slvrblkk

    Joined:
    Oct 6, 2013
    Messages:
    6,647
    Likes Received:
    29,535
    Location:
    Northampton, PA
    OK...here we go:

    left - 352
    middle - 372 IR gun
    right - 324

    convection blower is a 140 cfm.....currently burning a mix of FSU and AWF's.....

    Wifey started asking what I was doing and started giggling to herself....I told her to shut up...lol

    IMAG0657.jpg
     
    slvrblkk, Feb 10, 2014
    #20 Top
    brokenwing, DexterDay, IHATEPROPANE and 1 other person like this.
Page 1 of 2