In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Simplicity 6211 question?

Discussion in 'Chainsaws and Power Equipment' started by Pallet Pete, May 2, 2015.

  1. Pallet Pete

    Pallet Pete Moderator

    Joined:
    Oct 2, 2013
    Messages:
    13,479
    Likes Received:
    54,102
    Location:
    Ovid
    I just brought it home and it runs great however it grinds a little when shifting into gear and is very hard to go into reverse. Its my new project restoration.

    Is it possible to adjust the Clutch?

    Thanks guys

    Tractor.jpg
     
    Pallet Pete, May 2, 2015
    #1 Top
    mike bayerl likes this.
  2. Guido Salvage

    Guido Salvage

    Joined:
    Oct 5, 2013
    Messages:
    1,735
    Likes Received:
    4,938
    Location:
    The heart of the Bluegrass
    Your tractor is the same as an Allis Chalmers T-B 11. Do a Google search and you should be able to come up with a manual.
     
    Guido Salvage, May 2, 2015
    #2 Top
    Pallet Pete likes this.
  3. concretegrazer

    concretegrazer

    Joined:
    Oct 3, 2013
    Messages:
    4,429
    Likes Received:
    12,455
    Location:
    Southwest MO
    concretegrazer, May 2, 2015
    #3 Top
    Pallet Pete likes this.
  4. old 040

    old 040

    Joined:
    Feb 23, 2015
    Messages:
    724
    Likes Received:
    2,288
    Location:
    Buckeye State
    this usually means the drive belt isn't stopping from spinning the pulley on the trans when the clutch is pushed in, the belt/trans pulley shouldn't be spinning when trying to shift...........
     
    old 040, May 3, 2015
    #4 Top
    HDRock, DexterDay and Pallet Pete like this.