This is a mean little SOB. Seriously. It's had the squish, and the piston cut flat. Blows about 225psi. Timing numbers are insanely perfect for this model. Tough to get one this good. It's got a new WT194 carb, and a new OEM mesh air filter. Tunes to 15,000 with the air filter installed. Video is uploading. 500.00 shipped PHO
This saw needs a little extra attention. I would never use it on less than 32:1......and it needs to be tuned with a tach. It runs great at idle, starts easily, the air filter is installed (that's not normal for an 026 that is this bad azz), and it can be used as a work saw. But, tune must be watched. A 1/4 turn of the HS screw will take it from 13,500 to over 15,000.
